upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05
- Simple and Convenient adjustment method.Compatible with almost all motherboards and cases.
- GPU brace bracket kit. Support your cards from sagging and weighing on the motherboard.
- Designed for a wide range of graphics cards and boards. Low profile for single or dual setups.
- Showing the details of the workmanship. It is a small graphics card support stand with three complex production process.
- 10.5 * 2.5 * 0.5 Inches, Full kit includes set of 4 screws and brace.
Reddazon may receive an affiliate commission if you make purchases on Amazon.com through this site. Thank you for using these links to support Reddazon.
Reddit Posts and Comments
0 posts • 43 mentions • top 38 shown below
2 points • Firedog26
Nice of you want a real bracket here is the link: upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05 https://www.amazon.com/dp/B076GYL25H/ref=cm_sw_r_cp_api_i_zjPsFb96EBZN7
2 points • Apertures_
Thanks! And sure here it is. No issues with it so far, had it for about 5 months. They have one with a little lighting on it for $5 more
1 points • Rey_Mezcalero
Is the sagging causing any monitor issues or the card shuts off at random times?
I had got this and it worked well
1 points • ElDakaTiger
Normal for non back-boarded GPU. If it truly bugs you you can purchase a GPU support for 8$ on amazon. I use this one https://www.amazon.com/gp/product/B076GYL25H/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 haven't had a problem with it.
1 points • sakakichama
1 points • idunowat23
If you transport it upright like that, you'll want to remove the video card so the bounces don't make it pull down on the socket. Or you can use a GPU brace.
AIO will be fine.
1 points • Dealj0bber
The msi armor 580 sags if you let it. I bought this to brace it.
1 points • Renwoz
I use this:
1 points • JoshofOSRS
I bought a really fancy sag preventer. Really cheap too. Sag reducer/preventer
1 points • Emily_MI
Thank you for the info, so something like this you mean?
1 points • m1serablist
a gpu brace, if you use it right it will keep a sagging gpu parallel to the floor. something like this. https://www.amazon.com/upHere-Graphics-Anodized-Aerospace-Aluminum/dp/B076GYL25H/
1 points • goathens
Ohh, i've used brackets for a few years now on my builds. upHere models. It was a bit overkill for the evga ultra card I used before (that card already had 3-screws in the pci bracket), but for the thicc3 I don't think I'd run without it. I put the tower on its side, installed the card flat, tightened up the bracket and screws, and stood the tower back up. No chance for sagging, but I wouldn't be surprised if it sagged like a mofo. https://www.amazon.com/upHere-Graphics-Anodized-Aerospace-Aluminum/dp/B076GYL25H
1 points • thenseruame
They make other types of braces, I have one like this.
1 points • Foxbox55
This is what I use. Works great
1 points • icykronik
If your worried about it you could always get a gpu support bracket. hereis a cheap one, or you could get one with rgb etc.
1 points • shawnxsather
While it should, lol. No it did not. This is actually the “up here” GPU bracket which can be had for a whopping 7 US dollars. But it did require some custom bending to work with my strix model as without the custom bends it sat right in the middle of my fans. But a solid bargain nonetheless for the price. The sticker was bought on eBay: search rtx badge
upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05 https://www.amazon.com/dp/B076GYL25H/ref=cm_sw_r_cp_api_i_hr8IEbR07DYZE
1 points • arvyarc
This is what a GPU bracket is, just surf out Amazon, they have a couple of different designs and all. Good luck on the build.
1 points • ny_soja
I've noticed some sag in my build. I'm using a Asus X570e gaming mobo and I am currently looking at some solutions to help with sag. This is what I have found so far upHere Graphics Card GPU Brace
1 points • sartaj-sandhu
Amazon, the quality is great and it’s affordable!
upHere Graphics Card GPU Brace... https://www.amazon.com/dp/B076GYL25H?ref=ppx_pop_mob_ap_share
1 points • umjammerlammy
1 points • shelms488
Just get something like this and you should be fine.
Whatever you do don't use pink, or any color for that matter, bubblewrap whatsoever though.
1 points • SrslyCmmon
10 bucks, great reviews, enjoy.
1 points • RolandMT32
Yeah, it is heavy. I got a support brace to help prevent it from sagging and warping the motherboard.
1 points • Heavyoak
That's brilliant but the uphere brace is better.
2 points • 9okm
That's a big GPU. Might want to get a support bracket. https://www.amazon.com/upHere-Graphics-Anodized-Aerospace-Aluminum/dp/B076GYL25H
2 points • Cheesywizardstaff
It looks good, just need a bit cleaning up. Things i'd do:
- Route the 24 pin through the side
- The cable coming from the top of the CPU cooler can go into that bracket on the MOBO and then plug in, you won't see it anymore.
- Get a GPU brace. You can get a fancy RGB one, or vertical GPU mount which are kind of costly for what they do, but they look pretty neat.
- https://www.amazon.com/upHere-Graphics-Anodized-Aerospace-Aluminum/dp/B076GYL25H/ref=sxts_sxwds-bia-wc1_0?crid=S0T9ERR3IFX7&cv_ct_cx=uphere+gpu+bracket&keywords=uphere+gpu+bracket&pd_rd_i=B076GYL25H&pd_rd_r=af6082c8-3269-4fa5-ac23-48a71d13d565&pd_rd_w=0TI6T&pd_rd_wg=02t7V&pf_rd_p=c8430d96-912c-40d1-9740-e1beca245dd5&pf_rd_r=ZQJH46TTT1XK5BY4KECV&psc=1&qid=1583612477&sprefix=uphere+gpu+%2Caps%2C178 Cheapest/most effective one found on amazon.
- Possibly buy more fans, Grab cheap ones on amazon, or good ones, up to you. (you may need a fan hub depending on how many you have, for better cable management)
- Possibly buy cable extensions, or entire mod kits if you have a modular PSU. (This isn't entirely necessary but will add to the overall look.)
- Smoke meth and hail satan.
2 points • chaos_neutral13
Hey guys needed some advice. So my computer is now coming up on 2 years old and while I admit I didn't worry about it till now my hypochondriac self is now super worried about my gpu sagging. Is mine really bad? do I need support for it?I bought a brace online already (https://www.amazon.com/upHere-Graphics-Anodized-Aerospace-Aluminum/dp/B076GYL25H/ref=mp_s_a_1_5?dchild=1&keywords=gpu+support+bracket&qid=1605752551&sr=8-5)
but... I was also worried that since its been fine for 2 years a brace could break it or rather make it not work if the gpu had settled to that position. Here's pics of the gpu advice on if I should worry about it or not would be useful thanks yall. https://imgur.com/a/lR2GCj3
2 points • TreGet234
or just prop it up with a toilet paper roll like an animal.
1 points • sqlallstar
Yep, I ordered the bracket from here - works OK, but you need to make sure the screws are very tight so the bracket doesn't sag at all!
1 points • ThymirusConfederatus
1 points • nyichiban1
and also run the gpu wire the other way so it doesn't cover the oled
1 points • Phikita
Hey man I have the same exact card and the exact same problem, I just got mine 3 days ago, and I used to have a huge coil whine issue with my 1080ti Strix now I have this fan issue. The only thing that fixes it for me, and it's a bit scary is to lift the farthest from mount corner very high and the sound goes away, so it seems like it's a balance issue with the middle fan. I'm going to buy a bracket I found off amazon and give it a try otherwise I'll be bitching to ASUS.
1 points • n_derrski
1 points • nivekdrol
i have this works good
1 points • mustfix
1 points • lolskies7
Haha I was the same way at one point. Except my liquid cooling leaked all over my cpu gpu and motherboard. Learned real quick lol. Yeah the d15 is no joke and is a great cooler, by literally everyone. This is my cooler on my 10700k https://www.amazon.com/dp/B0846LPTLD/ref=cm_sw_r_cp_apa_fabt1_n08XFbRFF6KTK If you got the money it's worth it especially if you want to get into ocing your cpu. But I also have the updated* 212 black rgb on my 3600.
Either style is fine. It might kill the aesthetic, but it looks better that a sagging gpu.
1 points • davideachter
You have a couple of options:
You might not need a graphics card, depending on the games you plan on playing and the resolution you plan to play at. AMD makes great CPUs with integrated graphics. If you do need a graphics card, multiple companies make brackets to help hold it in place. I've left some links to the things I've mentioned below:
1 points • memebr0ker
Case: NZXT H510 White
CPU: Ryzen 7 3700x
RAM: 32GB Corsair Vengeance LPX 3600mhz CL18
MOBO: MSI B450 Tomahawk Max
Storage: 500GB Samsung 970 Evo Plus and 2 Seagate Barracuda 2TB Drives
GPU: XFX 5700XT THICC III (You can also see a peek at the Uphere GPU sag bracket I got from Amazon. Here's the link for that.) https://www.amazon.com/gp/product/B076GYL25H/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
PSU: EVGA 700GD
The cable extensions are the white Asiahorse ones. Here's the link for those. https://www.amazon.com/gp/product/B07C735N9C/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Those fans are the Uphere White LED Fans. Here's the link for them.