YMDK DSA Profile 9009 Dye Sub 61 64 68 ANSI Keyset Thick PBT Keycap Set for MX Mechanical Keyboard GH60 XD64 GK64 Tada68 (Only Keycap)

I found them here. They're decent for the price but would watch out for the quality of the centering if you do get them.

YMDK DSA Profile 9009 Dye Sub 61... https://www.amazon.com/dp/B07WV4NSQZ?ref=ppx_pop_mob_ap_share

Says they were delivered on April 13. So I’ve been using them for 3 months. But there’s no shine or fading legends. And I mean.... for $34 instead of $120-$300 ill take it.

YMDK DSA Profile 9009 Dye Sub 61 64 68 ANSI Keyset Thick PBT Keycap Set for MX Mechanical Keyboard GH60 XD64 GK64 Tada68 (Only Keycap) https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_cp_api_i_3B2IFbFV7XE5B

Picked em up on Amazon

Thank you! Here’s the link for em: https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_cp_api_i_.ZirFbZ6YMS0A

I got the GK64 and replaced the keycaps with these

Yeah, it is a smaller right shift. It seems like most tada68 compatible keycap sets can fit on the Akko 3068. Here's the set I picked up. Comes with a few different shift key options. https://www.amazon.com/gp/aw/d/B07WV4NSQZ

ok, you may be on to something there.
I just swapped in the backspace from my One2TKL, doesn't appear to stick at all.
Tried an alternative key from the same set that i got and it too sticks.
Hmm.
 
I'm thinking i may have to send the set back and hope for a refund...
 
I guess that there's no actual fixes for it, being that its a keycap issue?

I don’t see that it says that the switches and stabs are lubed, which was also my concern. Wait I could really do a custom for around 150? Yeah I’d prefer not to do any soldering that’s my only fear of fucking everything up. Could I achieve something that looks like the tofu 60 acrylic rgb case with these key caps YMDK DSA Profile 9009 Dye Sub 61 64 68 ANSI Keyset Thick PBT Keycap Set for MX Mechanical Keyboard GH60 XD64 GK64 Tada68 (Only Keycap) https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_cp_api_i_Z6tfFb1ZX0Y6E

YMDK DSA Profile 9009 Dye Sub 61 64 68 ANSI Keyset Thick PBT Keycap Set for MX Mechanical Keyboard GH60 XD64 GK64 Tada68 https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_cp_api_i_EHklEbH0SE2EW Are these good keycaps? Not drilled to shell out for gmmk set yet

I would say if you're trying to figure out where to allocate your money, it would be better spent on nicer switches than keycaps. Switches will make more of a difference in the typing experience, and you can always upgrade your keycaps later. Not to mention that'll give you time to keep your eye on group buys so you can buy something you really want instead of just settling for whatever is available right now. I've been using these on my board for a few months and have no complaints.

Hey! check it out! https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ/ref=sr_1_8?keywords=keycaps&qid=1580926562&sr=8-8

Here

I have found it, thank you here is the link:

https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ/ref=mp_s_a_1_2?dchild=1&keywords=9009%2BDSA%2Bkeycaps&qid=1593277252&sr=8-2&th=1&psc=1

YMDK DSA Profile 9009 Dye Sub 61 64 68 ANSI Keyset Thick PBT Keycap Set for MX Mechanical Keyboard GH60 XD64 GK64 Tada68 (Only Keycap) https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_cp_api_glc_fabc_DYg5Fb58QB1RT?_encoding=UTF8&psc=1

YMDKYMDK

Have you looked on Amazon? Here is one example: https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_cp_api_fabc_DJ-XFb70J4BF2.

https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ/ref=mp_s_a_1_9?dchild=1&keywords=keycaps&qid=1594580698&sprefix=keycaps&sr=8-9

They’re pretty good! Getting them on was kinda rough because they seem a little tight in the switches? When I first had them on the keyboard was a little uneven but after using it for a while it either fixed it or I stopped noticing lol.

These are the ones I ordered! link

https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_sms_apa_i_rmN7Eb79JJW8N

Those are YMDK DSA 9009s if I am correct: https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ

https://www.amazon.com/dp/B07WV4NSQZ/ref=cm_sw_r_tw_dp_U_x_ZprlEb00JKZV1

I have a recommendation. buy the expensive case, get the cheap keycaps. Here are the ones that i was looking into, they have a 65 set, which i'll link. https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ/ref=sr_1_1?dchild=1&keywords=ydmk+keycaps&qid=1602002427&sr=8-1 These have a lighter look to them, dye sub DSA's with a 9009 look. I have the YMDK carbons on my board, they look amazing, but sadly for that set, they don't have a 64/65.

I have this set https://www.amazon.com/-/es/Teclado-completo-teclado-mec%C3%A1nico-Kira96/dp/B07WV4NSQZ/ref=sr_1_7?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=keycaps&qid=1586479901&sr=8-7 and quite like it, you have a nice selection of budget keycaps in Amazon

https://www.amazon.com/gp/product/B07WV4NSQZ/ref=ox_sc_act_title_1?smid=A257ALKOU7JKIJ&psc=1

If anyone is interested!

there's this that I found during my search and also this

its a miya panda pro mx speed switches with these keycaps https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ/ref=sr_1_7?keywords=keycaps&qid=1576382598&sr=8-7

:)

The question really comes down to what layout do you want? Or better yet, how small can you tolerate? Do you need a number pad? Do you need arrow keys? A 60% keyboard would be best for FPS because it gives you more space to bring your mouse hand in closer. Something like an Anne Pro 2, Ducky One 2 Mini and Vortex Pok3r would work well. If you are looking for something low profile I suggest getting some aftermarket DSA profile keycaps. They are slim and have a uniform profile, most similar to a laptop keyboard.

Here is an example of some DSA caps that you can pair with any 60% keyboard.

https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ/ref=sr_1_1?crid=U7SNY7622AG8&dchild=1&keywords=dsa+keycaps&qid=1588264875&sprefix=dsa%2Caps%2C288&sr=8-1

​

Some people need arrow keys but can live without a number pad, so they need a tkl. I recommend the Drop CTRL high profile. If you need a full sized keyboard with number pad I recommend the Ducky Shine 7.

The keycaps are YMDK DSA Profile 9009s: https://www.amazon.com/gp/product/B07WV4NSQZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

There is another version of these keycaps by NPKC that I've read claim slightly better build quality but these keycaps so far feel very solid and look very good.

Edit! 9009* https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ

Here's a few I've saved from Amazon

https://www.amazon.com/Drop-Canvas-Keycap-Tenkeyless-Keyboards/dp/B081DDG7CJ/ref=redir_mobile_desktop?ie=UTF8&aaxitk=I2mBiHNGIwnhXZXe3Lm7sQ&hsa_cr_id=1981608480301&ref_=sb_s_sparkle&th=1

https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ/ref=sr_1_7?dchild=1&keywords=keycaps&qid=1586953985&sr=8-7

https://www.amazon.com/HK-Gaming-Dye-Sublimation-Keycaps/dp/B08156NG7K/ref=sr_1_19?dchild=1&keywords=keycaps&qid=1586953985&sr=8-19

There's a huge price difference between the first (from Drop) and the others. I'm wondering what the justification is for that

those keycaps are 30$ shipped on amazon

https://www.amazon.com/YMDK-Profile-Keyset-Mechanical-Keyboard/dp/B07WV4NSQZ

These should get you started! When you're shopping for keycaps the biggest thing to look for is the 1.75u shift and the three 1u keys for the bottom row ctrl, fn1, fn2. If it is a full size set of 104, it will likely not work.

YMDK OEM Keycaps (Amazon)

YMDK DSA Keycaps (Amazon)

Keychron K2 PBT Keycaps (won't be an exact fit unfortunately)

More DSA Keycaps (Pimp My Keyboard)

KBD75 Collection (some may not be PBT)