VIVO Single Monitor Fully Adjustable Computer Desk Mount, Articulating Stand for 1 LCD Screen up to 32 inches STAND-V001E

Amazon

If you can, move the mounted one down almost touching the desk, slightly tilted up, then the other one on a monitor stand above and slightly tilted down. Or consider a stand like this, having the top monitor more fixed in place and the other one free to move with the lx mount

>https://www.amazon.com/VIVO-Single-Monitor-Adjustable-STAND-V001T/dp/B0155LJATK

tall monitor stand!

Here you go VIVO Single Monitor Desk Mount... https://www.amazon.com/dp/B0155LJATK?ref=ppx_pop_mob_ap_share

Edit: I didn’t pay that much for it don’t buy it at 70 dollars there are cheaper ones!

VIVO Single Monitor Desk Mount,... https://www.amazon.com/dp/B0155LJATK?ref=ppx_pop_mob_ap_share

I have an elevated 34inch uw monitor. Msi mag34. If you look in my post history you can see my setup. Lifted it in June. No problems yet. This is the stand + arm https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_apap_iyfbMPRjB2dTO

I just went through a similar process and was planning on the Ergo LX as I was mainly after more height, but ended up with a sort of Frankenstein build that works really well IMO.

Like u/ILikePutz says above, the amazon basics arm is the same arm style as erotron at way less the price but the main pole off the base is really short so it's hard to get good height out of it.

What I figured out through trial/error and amazon sleuthing is that the Amazon Arms also fit perfectly on these Vivo Stands www.amazon.com/gp/product/B0155LJATK/. If your after more height and the full adjustability the Amazon Basics/Ergo Arms provide I'd honestly get the AMZ basics arm and that VIVO stand. If you don't care so much about the adjustability, I'd actually just get the VIVO stand above, I've got my main 34" on it and because the arm has 3 different pivoting sections you'll definitely be able to get a couple more inches out of it like you're looking for.

It’s on a VIVO extended mount

https://www.amazon.com/VIVO-Single-Monitor-Adjustable-STAND-V001T/dp/B0155LJATK

Here’s a link to the mount

VIVO Single Monitor Desk Mount, Extra Tall Fully Adjustable Stand for up to 32 inch Screen (STAND-V001T) https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_i_4rM9EbN72TAZ6

VIVO Single Monitor Desk Mount, Extra Tall Fully Adjustable Stand for up to 32 inch Screen (STAND-V001T) https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_i_G.K9Eb031XRN5

The monitor is 34 ultra wide but it handles it fine (so far)

I have an older version of this one.

VIVO Single Monitor Desk Mount, Extra Tall Fully Adjustable Stand for up to 32 inch Screen (STAND-V001T) https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_fab_3yHBFbTXEMMFB

Haha! Sorry to hear that. I actually used this single stand, and had an extra arm laying around.

VIVO Single Monitor Desk Mount, Extra Tall Fully Adjustable Stand for up to 32 inch Screen (STAND-V001T) https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_i_tcu2Eb2HTA3HP

Hope this helps get you what you’re looking to do!

I'm 6'3" and had looked at many.. finally decided on this one and love it.

https://www.amazon.com/gp/aw/d/B0155LJATK

I've read many posts saying two independent mounts is better than a single dual mount in terms of both wobble and flexibility.

Best of luck

The bottom one is just the stand it came with, the top is https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_fabc_lU3UFbKXA0QBW?_encoding=UTF8&psc=1

https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Thats the one for the ultrawide. The other 2 are the amazon basics single-monitor mounts.

It looks very similar to the VIVO one I have

VIVO Single Monitor Desk Mount, Extra Tall Fully Adjustable Stand for up to 32 inch Screen (STAND-V001T) https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_i_oQLKEbNK8AXCN

Hahah thanks man!

This is the one I have. I honestly think my monitors is slightly too heavy for it, as it doesn't stay perfectly still, but in the position I have it in now it works perfect. https://www.amazon.com/dp/B0155LJATK?ref=ppx_pop_mob_ap_share

two singles - one 9.5" and 1 extra tall

Something like this? https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_apa_i_-txoFbRS3J1D5

https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

This one:

https://www.amazon.com/VIVO-Single-Monitor-Adjustable-STAND-V001T/dp/B0155LJATK/ref=sr_1_1?dchild=1&keywords=VIVO+Single+Monitor+Desk+Mount%2C+Extra+Tall+Fully+Adjustable+Stand+for+up+to+32+inch+Screen&qid=1587589350&s=electronics&sr=1-1

For top

https://www.amazon.com/VIVO-Monitor-Adjustable-Articulating-STAND-V001/dp/B00B21TLQU/ref=sr_1_2?dchild=1&keywords=VIVO+Single+Monitor+Desk+Mount%2C+Extra+Tall+Fully+Adjustable+Stand+for+up+to+32+inch+Screen&qid=1587589379&s=electronics&sr=1-2

For the portrait/side mount

A short vesa mount arm on the right holding my ultrawide, and a tall vesa mount arm on the left for my flat panel

I got Suptek ones from amazon.de. In the US maybe Vivo could do the same (it only holds 8kg/17.6lbs tho)

They are 80cm tall and can handle 10kg (22lbs). My monitors are ~7kg each.

There is no quick way to adjust height, but I'm keeping those on same place anyway, so it's not a problem.

And I still could put those 13cm higher, so they're not even at their limit yet.

I'm using the VIVO monitor mount for the top monitor and the base for the G9. I thought I was going to hate having a base after years of stands, but even though it's large, it doesn't feel opressive. https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Here's a similar one on Amazon U.S. https://www.amazon.com/VIVO-Single-Monitor-Adjustable-STAND-V001T/dp/B0155LJATK/ref=sr_1_6?dchild=1&keywords=monitor+boom+stand&qid=1593824016&sr=8-6

Not OP, but it possibly is this:

​

https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&fpw=alm

​

I have a stacked Ultrawide + 1080p monitor setup similar to this and that is what I used to have the extra height. You can see that in OP's picture it is 2 stands rather than 1 so I assume this is what he did.

​

If you're talking about the shorter one, sorry then I have no leads.

It's been very study. No drooping at all.

Top Arm: https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Ultrawide arm: https://www.amazon.com/gp/product/B01J6KLGKC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

This Samsung monitor: Samsung - UR55 Series 28" IPS 4K UHD Monitor

...and this monitor arm: VIVO Single Monitor Desk Mount

Good price for what it is. Needed spacers for the VESA mount though, since the back is curved and has a non-stand recess. Worked out well, though.

https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1 Used this one for the top monitor. https://www.amazon.com/gp/product/B079YQQDT2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Use this one for the bottom as it extends further so I can bring it closer to my face during game, and I can adjust it's height to be more eye level.

https://www.amazon.com/VIVO-Single-Monitor-Adjustable-STAND-V001T/dp/B0155LJATK

I like having it up there. It is just a 27-inch 1080p monitor that I use to watch videos or teleconference. Here is the arm that I use:

https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

I got the extra tall version.

This mount here. We liked it so much when my wife graduated to a stacked setup we ordered one for her too! She is next up on the desk upgrade list. I got her an adjustable Jarvis desk for Christmas. She just doesn't know it yet... ;)

https://imgur.com/a/Ffpx3zp

https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

Here you go, bud! So I have my 24" monitor mounted on this and my ultrawide sits on it's built-in stand underneath it the mounted one!

I actually used two different mounts from a method I saw on YouTube. Here are the links to them: Short stand for Ultrawide - https://www.amazon.com/gp/aw/d/B00YJFY3AA?psc=1&ref=ppx_pop_mob_b_asin_image Tall stand for 27" - https://www.amazon.com/gp/aw/d/B0155LJATK?psc=1&ref=ppx_pop_mob_b_asin_image

These are the mounts I use!

VIVO Single Monitor Desk Mount,... https://www.amazon.com/dp/B0155LJATK?ref=ppx_pop_mob_ap_share

VIVO Black Heavy Duty Articulating Single Pneumatic Spring Arm Desk Mount Stand, Fits Standard and Large Ultrawide Monitor Screen up to 35 inches with Maximum VESA 200x100 (STAND-V101H) https://www.amazon.com/dp/B07NH9TDHC/ref=cm_sw_r_cp_api_fabc_.cTPFb35FJ53D?_encoding=UTF8&psc=1

Link 1

Link 2

Hey guys, Its a 2 part system in order to get the top monitor to a more comfortable position.

Short arm
Long arm

The only thing worth noting is that at the base they're slightly different one has a plastic tapered cylinder the other is just a pole to metal you can see the difference in the images. My mounter riser I made hides that so its not noticeable. Admittedly it did annoy me a bit. Something to consider if you go with this!

I have two amazonbasics arms like this, you can set them up however you want. I could fit one of these and mount a top monitor no problem.

I’m using two different mounts. I’ve used an amazon basics adjustable shock mount for the 34” for a while. When I added the upper monitor I purchased a vivo extra tall mount.

Here are links to the two mounts that I have.

https://www.amazon.com/AmazonBasics-Premium-Single-Monitor-Stand/dp/B00MIBN16O/ref=mp_s_a_1_3?dchild=1&keywords=amazon+basic+monitor+mount&qid=1588442563&sprefix=qmazon+basic+monitor+mount&sr=8-3

https://www.amazon.com/VIVO-Single-Monitor-Adjustable-STAND-V001T/dp/B0155LJATK/ref=mp_s_a_1_7?dchild=1&keywords=vivo+monitor+stand&qid=1588442629&sprefix=vivo+&sr=8-7

I’m using this desk mounted stand

VIVO Single Monitor Desk Mount, Extra Tall Fully Adjustable Stand for up to 32 inch Screen (STAND-V001T) https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_i_zyIeFbH4HBAFT

I have my dell u3415w (top) and kept the oem stand that came with my lg 38gn950 (bottom) https://i.imgur.com/nxfLRBl.jpg

I think I figured it out boys. Tell me if this seems probable. Use this one as the bottom arm VIVO Single Monitor Desk Mount, Extra Tall Fully Adjustable Stand for up to 32 inch Screen (STAND-V001T) https://www.amazon.com/dp/B0155LJATK/ref=cm_sw_r_cp_api_i_1mzgFb60MBWH0. Then attach this arm from this kit for the top. VIVO Single LCD Monitor Desk Mount Stand Fully Adjustable/Tilt/Articulating for 1 Screen 13" to 27" (STAND-V001) https://www.amazon.com/dp/B00B21TLQU/ref=cm_sw_r_cp_api_i_xnzgFb4TSE6MT. And finally attach this so you can lower the height to the top arm. VIVO Height Adjustable VESA Adapter Accessory Bracket Kit for Individual Monitor up to 27 inch Screen (Stand-VAD3) https://www.amazon.com/dp/B0741CFJVW/ref=cm_sw_r_cp_api_i_QnzgFbNN6X82K.

I am actually using two different mounts. The main reason for that is because I could not find a three arm monitor that supports 34" wide screen monitors. And the ones that were close to support three screens did not have the option to move the top screen closer to my chair.

[top monitor mount](https://www.amazon.com/-/es/gp/product/B0155LJATK/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1)

[bottom mount](https://www.microcenter.com/product/485170/inland-dlb123-desktop-mount-for-monitors-10---30)

The one at the bottom is amazing because I only use two arms and that gives me the freedom to move the other two screens at will.

I do, I have two arm mounts back behind the monitors on the left side.

​

https://www.amazon.com/gp/product/B01N5FTCJE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 For the CRG 90

​

https://www.amazon.com/gp/product/B0155LJATK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

For the ultrawide on top. The colors are unfortunate, but I saw that a previous posted with the CRG90 had nothing but good things to say about that monitor arm, so I went with the trusted opinion given how heavy that is.

let us look at some alternative options as you kindly mentioned to us meme sub illiterates

https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/ref=psdc_490624011_t1_B07L85LZ6G

$32.9

https://www.amazon.com/WALI-Premium-Adjustable-Capacity-GSDM001/dp/B0779JSRH5/ref=psdc_490624011_t1_B01AI2YGK4

$41.99

https://www.amazon.com/WALI-Single-Monitor-Adjustable-Capacity/dp/B01IWOCCOW/ref=psdc_10967501_t1_B0779JSRH5

$42.99

https://www.amazon.com/VIVO-Single-Monitor-Adjustable-STAND-V001T/dp/B0155LJATK/ref=psdc_10967501_t3_B01IWOCCOW

$69.95

"Regardless" to that, I will still round off the price to say $100 and redo your maths;

Total Requirement: 5000 units

Apple stand cost:

1000*5000 = $5000000

Cheap poor people stand cost :

100*5000 = $500000

Replacement cost for 80% of CPPS:

80% of 500000 = $400000

Let me give apple the benefit of the doubt "Regardless" and say another 80% CPPS break down; the total cost to company will now be:

500000 + 400000 + 400000 = $1300000

Let us round it to $1500000; say to account for the loss of business and an additional misc cost.

Difference in cost:

$5000000 (Apple) - $1500000 (CPPS) = $3500000

So we will still save :

(3500000 * 100)/ 5000000 = 70 % of the money I would have spent on the Apple stand.

Of the remaining money i can still buy 37000 more stands. Or better actually, pay the workers in the manufacturing lines for these stands some additional bonus.

​

​

*here's a potato in apologies*

Edit: mistake in continuity