Ubiquiti Unifi Ap-AC Lite - Wireless Access Point - 802.11 B/A/G/n/AC (UAPACLITEUS), White

Won't even need a router, just a cable from the existing router to a network switch.

And then as a bonus they can find somewhere to hide an access point and have their own WiFi. Set it up to not broadcast the SSN, and they'll never know.

Ubiquiti Unifi Ap-AC Lite - Wireless Access Point - 802.11 B/A/G/n/AC (UAPACLITEUS), White https://www.amazon.com/dp/B015PR20GY/

Yes that’s what I mean by channel. But also the 5ghz, use multiple channels.

after the switch you can add a wired access point to get wifi upstairs. ubiquiti makes good ones.

No advantage at all. You want something wired. When I say “wireless access point” , its a wired device but extends your wireless range. Look for something like this

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=mp_s_a_1_1?adgrpid=82926430460&dchild=1&gclid=EAIaIQobChMIjaGYu7j_6gIVptSzCh17Iw_4EAAYASAAEgKNMvD_BwE&hvadid=394673296474&hvdev=m&hvlocphy=9006721&hvnetw=g&hvqmt=e&hvrand=13070149781662329927&hvtargid=kwd-299142076306&hydadcr=20132_9346217&keywords=ubiquiti+ac+lite&qid=1596471684&sr=8-1&tag=hydsma-20

It’s just extending your network, and allowing access wirelessly. This does not take place of Your router, you will still need that.

100%. that is the setup I have been using the last few weeks for VD streaming and it works very, very well.

(I think) I bought an older version of the ap on accident though- the version I linked is newer and looks better so ¯\_(ツ)_/¯.

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ plug this into the ethernet, comes with a poe adapter that you can put on the source end of your ethernet cable so it only needs the 1 wire to work. pretty simple to setup.

$75 shipped? They are $81 new on Amazon https://www.amazon.com/dp/B015PR20GY/ref=cm_sw_r_apa_i_NwEJEbBB05R67 I think I pay $6 more for new with full warranty and free returns.

This was linked to me in another thread I posted. I am having trouble finding information on how it works, tho. Once I connect it via ethernet will it be providing a new network, separate from my old one?

What you describe is quite literally how non-mesh multi-access point setups work. I'll re-iterate, check out Ubiquiti gear: they have a software controller and as many APs as you want managed by the controller (the controller is just software but they sell a standalone hardware solution as well). The APs are ~$80 and the controller software is free.

You can hop over to /r/Ubiquiti/ and read all about it.

Best APs for my scenario?

Hi all! I made a post recently asking some more general advice and got some fantastic feedback. I'm deciding against the mesh, and going for the higher performing dedicated hardware, eventually extended via MoCA. So probably just going to buy an ER-X with an AP to start, see where my dead spots are, and then add MoCA adapters + additional APs.

So, basically 2 questions...

1. Do the APs make a difference? I don't think I care too much about maximum performance, would trade a little bit of that for smoother roaming and easier setup/maintenance. Note that the TPs are $20 cheaper.

2. Do I need a switch to connect to the ER-X? I see people mention that, but the ER-X has 3 extra ethernet ports, which seems good to me. I'll just be connecting it to my main AP and my PS4.

Thanks!

Ubiquiti AC-Lite ($79) https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=sr_1_3?keywords=ubiquiti+access+point+ac-lite&qid=1578064900&sr=8-3

TP-Link EAP225 ($57) https://www.amazon.com/TP-Link-EAP225-V3-Wireless-Supports/dp/B0781YXFBT/ref=sr_1_1?crid=1E096Y3HZA0G7&keywords=tp-link+eap225&qid=1578064860&sprefix=tp-link+ea%2Caps%2C178&sr=8-1

EdgeRouter X ($52) + UniFi AP AC Lite ($84) = $136. No need for a switch as the ER-X has one built in

If you can run Ethernet to a couple of places, then you could get two or three access points and place them wherever you need them.

The Unifi AP AC Lite or TP Link EAP 225 are both good options that deliver solid performance.

How big is the dwelling? I'd usually recommend something like a Unifi AP-AC-Lite

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY

They are pretty cost effective for the quality of the device. The Pro model is even better, but likely overkill for your situation. They come with a POE injector to power them since they are not designed to run on a normal adapter. The biggest caveat with these is that they are suppose to be managed via controller software, since these are semi-professional grade units. However, you can either install the free controller on a PC and use it only when you set it up and update it, or you can use the smartphone app for managing a single unit, though your options will be more limited.

https://www.amazon.com/dp/B015PR20GY and https://www.amazon.com/dp/B00YFJT29C

There's a slight learning curve, but if you can use a smartphone app and a wizard, you'll never have to reset your device again.

Also, get the 4 year protection plans. For $10 each, if the device craps out in the next half decade, you get a new one free.

Return that crap router. I have Fios too, that router is worth no more than $50.

Do it right(and cheaper).

Do a router and a access point. Here’s what most of reddit recommends for budget

Router

access point

Stay away from WiFi 6. It’s not ready for consumers

That combo is going to be significantly more powerful than any combo router/access point

If you are running coax to your router, call fios and have them switch you to Ethernet. It can be done over the phone. Then run a cable from your ONT(the box that converts fiber to coax/Ethernet. Generally found outside or in a closet).

Enjoy the nice stable network.

I'd recommend ubiquity.

You can get 4 uap ac lites

https://www.amazon.com/dp/B015PR20GY/ref=cm_sw_r_cp_apa_i_JGe.EbEJGHAJ8

And an Edge router x

https://www.amazon.com/dp/B00YFJT29C/ref=cm_sw_r_cp_apa_i_fHe.Eb48XVB4J

For me it is $411.20 after tax.

Ubiquity is beloved.

They are more offically called wireless access points. Most major brands make them. Personally I am a big Ubiquiti fan.

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/

Or

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Long-Range/dp/B015PRCBBI/

$80/ea

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=sr_1_7?dchild=1&keywords=unifi&qid=1589468867&sr=8-7

​

I have used Unifi in a few places, including my own home. The roaming is awsome and supports many more devices than you would never need.

yeah, obviously on 2 different computers. I currently run VD and it actually runs quite well, this is our router https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=sr_1_1?dchild=1&keywords=ap+ac+lite&qid=1602112544&sr=8-1 . Its nothing beefy, but at least for a single setup its rock solid.

>Looking to spend $80-150

|ER-X|\~ $60.00| |:-|:-| |UAP-AC-LITE|\~ $80.00| |Total|\~ $140.00|

If that is too much, you can get the ER-X, and use an existing wireless router in access point mode (DHCP disabled) until you decide to get an access point. There are other options for access points from brands like TP-Link.

EDIT: Happy Cakeday!

It seems you just could get an access point. Love this Ubiquiti dish

https://www.amazon.com/dp/B015PR20GY/

The cheapest I have found is this: https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ and it's $80 (almost 20 over TPlink). Is this what you were referring to?

Getting a:

1x https://www.amazon.com/Ubiquiti-Networks-ER-X-Router/dp/B0144R449W/ref=sr_1_1?dchild=1&keywords=edgerouter+x&qid=1587752384&s=electronics&sr=1-1

1x https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=sr_1_1?dchild=1&keywords=ac+lite&qid=1587752410&s=electronics&sr=1-1

Better firmware and overall better experience especially on wifi and cheaper than that TP-Link all in one device.

This device will expand with you, all you need is more AC Lite devices to cover a larger space and not another router.

https://youtu.be/o-g2P3R84dw

This is a video about this setup, it is more about bufferbloat but he talks about the setup and how easy it is.

I personally use a TP-Link EAP245 v3 as my Access Point, but this is different then using there consumer stuff. I do like there unmanaged switches, but I do not care for there consumer routers.

>Unifi AC-LR

You don't need a long range access point, you need a couple regular access points and a switch (which your router might already be).

• https://www.amazon.com/EAP245-Wireless-seamless-Supports-Injector/dp/B07NMZR3F1/GY/

If your house really is pre-wired for ethernet, don't pay someone to install anything for you. It's literally Legos.

Edge Router X with a 16 to 24 port switch (depending on your needs). Unifi APs are great.

Here is what I use:

Edge Router X

TP-Link Jetstream 24 Port Gigabit Switch | Smart Managed Switch

Ubiquiti Unifi Ap-AC Lite

Don't buy some piece of shit 3 in 1 modem/router/ap. That's just ends up being a shitty modem, shitty router, and shitty access point.

For router I'd suggest https://www.netgate.com/solutions/pfsense/sg-1100.html

And a wireless access point like this https://www.amazon.com/dp/B015PR20GY/ref=psdc_1194486_t1_B015PRCBBI

For the modem research your self for what's compatible with your isp and get a decent one.

For a switch anything that's at least gigabit ports.

Also remember that a Gigbit and gigabyte are different things https://www.atlantic.net/hipaa-compliant-cloud-hosting-services/do-you-know-the-difference-between-a-gigabit-and-a-gigabyte/

If you get fiber make sure to ask if its to your apartment or just the node.

Say if they offer 3 plans like 10mbps 100mpbs and 1000mbps and you only need like 300mpbs and don't want to pay 1000mpbs they can usually obliged and negotiate a price for that.

What ISP speeds do you pay for, and what do you get from Amplifi?

From what you've described so far, it doesn't look like you have any abnormal usage. I assume you are just fine running Ethernet to the three locations you stated.

If cost is not an issue, I'd go for the nanoHDs for the two indoor locations. They are the latest, Wave 2 APs with 4x4 on 5GHz. Since you are probably going to ceiling mount them (?), it might be worth it to spend the extra dough on these so you don't have to climb a ladder and replace it later. However, the knock on the nanoHDs is that many report that their range isn't as good as the AC-PRO or AC-LR. They are pricey too. You didn't say how each floor of your 2200 sp ft house is laid out. If it's all mostly on a single floor, you might need two on the first floor, and maybe one in the basement.

If you want to save money and still have perfectly good wifi for your typical usage, you can get the AC-Lites instead of nanoHDs. They are only 2x2, but with just 4 people in the house doing typical things, they are plenty for wifi needs. They are about half the price. I use 3 of these myself, but the nanoHD wasn't available when I built my network (I'd get the nanoHDs today if I could, but just because they are new and my ceiling mounts are very high up, not because the Lites are somehow inadequate. The Lites are perfectly fine, no complaints from anyone).

For the basement, if it's just one room, you might want to consider the "In-Wall" Ubiquiti units. These mount typically on the lower wall on the same level as electrical plugs and other outlets. You will still need to run Ethernet to the mount location, but they also give you two easy-to-access Ethernet ports as well as local Wifi.

Outdoors, you will need an outdoor rated AP. I just recommended and still recommend the UAP-AC-M, which unfortunately has the word "Mesh" in it's name that causes confusion, but it is really just a typical AP that is outdoor rated. Very affordable at under $100, but you should see if your two indoor APs are enough to cover the back yard, because there is a good chance they can.

NanoHDs:

https://www.amazon.com/Ubiquiti-Compact-802-11ac-Enterprise-UAP-NANOHD-US/dp/B07DWW3P6K

AC Lites:

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=sr_1_2?keywords=ac+lite&qid=1582774443&s=electronics&sr=1-2

InWall:

https://www.amazon.com/Ubiquiti-Unifi-UAP-AC-Iw-Wireless-Access/dp/B06XZLP8Q6/ref=sr_1_3?crid=1TOI52JEXA5AS&keywords=ubiquiti+in-wall&qid=1582774585&s=electronics&sprefix=ubiquiti+in-w%2Celectronics%2C201&sr=1-3

AC-M Outdoor rated:

https://www.bhphotovideo.com/c/product/1296855-REG/ubiquiti_networks_uap_ac_m_us_unifi_ac_mesh.html

Thanks!

Is there a difference in these AP?

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY?pldnSite=1

https://www.amazon.ca/Ubiquiti-UniFi-2-4GHz-802-11-Passive/dp/B016K4GQVG/ref=dp_ob_title_ce

Amazon states the second one is newer but they don't seem to be any different.

So, I suggested this, but it's not exactly just plug n play. It's not hard to just have it working in a basic way. You need to have some networking knowledge. The wizards will get you up and running though and ubiquiti has excellent documentation. With the help of some YouTube tutorials, you could definitely do it.

But, it does take logging into it, and setting up some basic stuff. I'm definitely not a network pro, and I think i've gotten mine running wonderfully.

But you'd do it by plugging in the internet cable from the modem, or isp into any of the ports on the square box. Then, in the wizard, you tell it which port you plugged your isp into, or "WAN" (wide area network). So it knows to get internet from there. Then, plug any computers, another switch, or the access points into any of the other ports. It's a "pro-sumer" product, so you definitely can learn a lot, but should be able to get it going. Ask here or at /r/ubiquiti any questions you have and we'll help you along too.

here's the 2 devices i was talking about. This would keep you at your budget level, and give you your full internet speeds. I tested mine at home with just my old iphone, and was getting 260mbps through the wifi with this same setup.

https://www.amazon.com/Ubiquiti-EdgeRouter-Advanced-Gigabit-Ethernet/dp/B00YFJT29C

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY

https://www.amazon.com/Ubiquiti-EdgeRouter-Advanced-Gigabit-Ethernet/dp/B00YFJT29C

https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY

I had a low voltage guy do my house wiring. He just ran standard 14/2 alarm wire (EDIT: This might have been 22/4 wire, not sure) to all the doors & windows and used these sensors that wire directly in the door/window frame and a have matching tiny magnet that goes into the door/window. Since I have white doors & windows these are damn near invisible.

I also ran that same wire for wired motion sensor and glass break sensors.

If you haven't already, you may want to run some CAT6 into your ceiling for ceiling-mounted wireless access points like the Unifi AC Lite. Note that you don't need to have an in-ceiling gang box, you can just drill up into the ceiling and pull the cable down when you install it.

IP cameras are constantly getting cheaper and better so it's probably worth it to run enough CAT6 to the exterior walls to ensure you can place cameras there easily later if you end up wanting some.

One more note, I don't think code requires insulation on most interior walls, but for me it was definitely worth insulating every interior wall.