SGTKJSJS M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit

share ›
‹ links

Below are the top discussions from Reddit that mention this Amazon listing.

Electronics Computers & Accessories Computer Components Computer Screws

Info from Amazon Listing
  • M.2 Standoff and Screw for motherboard NGFF/NVMe Kit
  • compatible 13020 M.2 SSD Mounting Kit Standoff + Screws for Motherboard .
  • Package Content:Hex head jackscrews*4、Flat head Screws*4、Transparent screw washers*4、Screwdriver*1
  • M.2 Screw + Screw Hex Nut Stand Off for motherboard NGFF
  • Application: Perfect for universally laptop notebook repair, applied in electronics, computers, PC board, DIY hobby etc.

Reddazon may receive an affiliate commission if you make purchases on Amazon.com through this site. Thank you for using these links to support Reddazon.

SGTKJSJS

Reddit Posts and Comments

0 posts • 31 mentions • top 30 shown below

r/buildapc • comment
5 points • HauntingTaco

All my motherboards have either had a screw already in the standoff itself and/or in the accessories bag for the motherboard.

Edit: but if you're absolutely sure there's no screw, this should work https://www.amazon.com/dp/B07Q3DLCJ4/ref=cm_sw_r_cp_apa_i_yBPcFbA9EAZQ3

r/buildapcsales • comment
3 points • WarriorFelip

You can buy a kit for like $5 off of amazon Here's a link to the most sold one https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4

r/buildapc • comment
2 points • Spymonkey13

https://www.amazon.com/dp/B07Q3DLCJ4/ref=cm_sw_r_cp_apa_fabc_m.w2Fb3EJ8856

r/pcmasterrace • comment
1 points • 5olara

https://www.amazon.com/dp/B07Q3DLCJ4/ref=cm_sw_r_apa_i_emgQEbDSJAZDP

r/computers • comment
3 points • WobblyGobblin

Usually the screws and standoff come with the motherboard. Most M.2 screws are CM2x3-3.3. You could try this https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4 though it specifically states Asus in the description.

r/pchelp • comment
1 points • Baseball3Weston12

Well as others have said it should come with the motherboard, infact I used this motherboard recently and it was already on the screw. So if for some reason you can't find it here is a kit that even comes with a handy tiny screw driver! For $5 USD

https://www.amazon.com/dp/B07Q3DLCJ4/ref=cm_sw_r_cp_apa_fabc_N-N3FbEZKVDQE

r/buildapc • comment
1 points • Fountains1

You can get a full standoff / screw set from Ebay or Amazon for around $5 for the whole kit.

It's actually called an m2 screw, so if you have a local hardware store, there is a chance they'll just have the screw.

r/buildapc • comment
1 points • RexInMundum

Basically anywhere. You need to search for M.2 screws

Here's one on Amazon, but you can probably find something a lot more cheaper if you look.

r/pcmasterrace • comment
1 points • FrequentWay

You can order replacement screws,

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4 about $6 usd.

r/ASUS • comment
1 points • hd9909

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4/ref=sr_1_2?crid=1ANJAC04FCXVS&dchild=1&keywords=m.2+screw+kit&qid=1607306337&sprefix=m.2+screw%2Caps%2C222&sr=8-2

r/PcBuildHelp • comment
1 points • hurps0

I agree with the other comment, honestly just buy a new one. There's a kit here on amazon for like 5$ (Plus you'll be safe for the future)

r/Dell • comment
1 points • dhrumstix

https://www.amazon.com/gp/product/B07Q3DLCJ4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

r/buildapc • comment
1 points • iulusquintilius
r/pcmasterrace • comment
1 points • pjcali_

I used this one few months back.

M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit https://www.amazon.com/dp/B07Q3DLCJ4/ref=cm_sw_r_cp_api_i_.DA3EbEE65B4N

r/buildapc • comment
1 points • acastrov9

Looked for them tirelessly, can't seem to find them, even looked in my brother's mobo box and didn't find any m.2 screws. Does this look fine as a replacement?

r/buildapc • comment
1 points • Sol1tary

I bought a used motherboard and it didn't come with one either. Ordered this set on Amazon for $5.

r/hardwareswap • comment
1 points • TacoOfGod

They sell those on Amazon.

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4

r/Amd • comment
1 points • HH-Allen

same here, look at this now from amazon https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4/ref=sr_1_3?keywords=m.2+screws&qid=1579371572&sr=8-3

r/buildapc • comment
1 points • TrumpIsPutinsBitch8

M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit https://www.amazon.com/dp/B07Q3DLCJ4/ref=cm_sw_r_other_apa_i_E1FWEbJ86Q136

Something like this might work, it looks like a pretty standard m.2 screw.

r/buildapc • comment
1 points • rehsd
r/razer • comment
1 points • NeutrinoParticle

Most likely any M.2 SSD screw would work?Maybe try this?

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4/ref=sr_1_3?dchild=1&keywords=m.2+ssd+screws&qid=1590898924&sr=8-3

Edit: Or possibly contact Razer support and maybe they will have one?

r/Dell • comment
1 points • midas22

Thanks for the information, I was worried about that mounting thing.

Is something like this what you're referring to?

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4/ref=sr_1_3?crid=11UXLGU5X02OF

r/buildapc • comment
1 points • TastyBambino

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4

i couldnt find just the screw but this would work

r/buildapc • comment
1 points • Dinokknd

Hey mate, you would need an M key SSD, type 2242/2260/2280 (both SATA & PCIE mode) .

So essentially any NVME or Sata drive will do, as long as it's M Key. As for the screws - they are not too complex, look for any set matching this:

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4

You might also be able to poke ASUS for it.

r/buildapc • comment
1 points • twoleftpaws

Asus says the board comes with two, but they're pretty tiny and seem to walk off on their own.

You can buy small screw kits on Amazon, including one's "for Asus" but any M.2 screw shoud work. Just search for "M.2 mounting screw".

Here's a $5 kit.

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4

r/buildapc • comment
1 points • Brostradamus_

Then you need a screw. The size is M2 x 3mm Length. You can usually find them at hardware stores. Or you could just order this: https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4/ref=sr_1_3?crid=240DUV95NNZ0N&dchild=1&keywords=m2+x+3mm+screw&qid=1586878143&sprefix=m2+x+3mm+%2Caps%2C170&sr=8-3

r/techsupport • comment
1 points • DeeGeeFi

What do you mean you could screw the M.2 all the way down? You didn't have the standoff screw? That would cause the M.2 drive to be bent and that isn't a good idea.

You might want to get a M.2 screw/standoff kit.

https://www.amazon.com/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4

https://www.amazon.com/MICRO-CONNECTORS-Mounting-Components-L02-M2S-KIT/dp/B07GN8QHD6

r/Lenovo • comment
1 points • Rk1_Sloppy
r/pcmasterrace • comment
-1 points • PM_M3_STE4M_K3YS

I already did. 4 days until they come. I have an Asus board and got these https://www.amazon.com/dp/B07Q3DLCJ4/ref=cm_sw_r_cp_apa_i_yadYFbH9G59FH