PERLESMITH Universal TV Stand - Table Top TV Stand for 37-55 inch LCD LED TVs - Height Adjustable TV Base Stand with Tempered Glass Base & Wire Management, VESA 400x400mm

you could just lift the TV up with some blocks of wood or big thick books. Looks like just a couple inches would be enough to get the center under there. this style of mount might work well for you: https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/

Look into TV stands that will raise your TV up off the top of your the console

https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/

this tv stand or something similar. Let’s you raise it to whatever reasonable height you need. Works like a mount but sits on a stand.

https://www.amazon.com/gp/product/B077MJZ6ZG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

great stand for this setup!

I recommend a universal table top stand, this Perlesmith model should work perfectly for your TCL. Perlesmith's stands are extremely well built and mine supports my 65" X950G perfectly. It'll fit nicely on your existing entertainment stand and offer better stability than the OEM feet.

I have a 6 series and adore it. I hate the stand as well so I got a tabletop TV stand like this one and it allowed me to fit it on my smaller TV stand with a speaker underneath the TV as well. Great stand and excellent TV imo. I actually preferred the 6 series over the M558 which I used for about a week and returned

There's always a passable work-around solution to this. Check out a VESA-mount TV base stand, something like this: https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_apa_i_XtWiFb3WMWEW3

I had the same concern. Purchased this https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_apa_i_20lcFb2S33KMS

No longer need to limit your soundbar choice by the height of the tv.

he's talking about something like this: https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/

I used one of these to lift my TV recently

PERLESMITH Universal TV Stand - Table Top TV Stand for 37-55 inch LCD LED TVs - Height Adjustable TV Base Stand with Tempered Glass Base & Wire Management, VESA 400x400mm https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_api_i_RYOEEbRS7G7H5

There is a second slot closer to the middle of the TV that they can be placed at. You can also buy a universal foot for the TV like this. Don't overthink one bad review. Sony put legs on the TV because of aesthetics not because they're required to be 2 feet instead of a center.

>Actually do I need a sub with a the RB42's or something similar?

Depends how serious of a listening experience you want in your bedroom. You aren't going to be shaken by a 4" woofer in the RB42's, but their bass presence will certainly be a step up from the OLED's speakers and a soundbar. If you want some boom booms and rumbley rums, get a sub. I suggest you see how you like the Miccas on their own and add a sub later on.

You'll be hardpressed to not end up with a 7.2 receiver in the same ballpark as what 5.2 receivers go for.

VESA pattern for the 55" B9 is 300x200. This should do.

This one seems very popular.

I haven't used one of these yet but when I replace my broken tcl I'm definitely going to be getting one.

https://www.amazon.com/gp/product/B077MJZ6ZG/

The tv stand I have in my room is on the shorter side.

You can get a different mount that's in the center too, something like this

Oh man, this stand is great! I got installed and the 65 B9 looks great. Nice tempered glass base.

Let me know if you want some pics of the install process.

BTW, I bought the $30 37"-55", and it's fine. https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_em_apa_i_7SVYEbDRFCD22

Yep I've seen that option, cheaper too on Amazon

From my understanding the S35 is tinny and people don't like it and complain about voice clarity. You want the S30 center instead. Buy a stand to raise your TV above the speaker

just buy this tv stand https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_api_fabc_-qeSFb7PJ1C1F?_encoding=UTF8&psc=1

One like this? https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/ Honestly that's a much better price than I was expecting.

your TV has 300mmx300mm VESA mount patern and weights 36.7lbs.

Literally hundreds of products to mount it.. you can put 300x300 vesa in Amazon and will have tons of different mounts..

If I understand, you want something like this linked below, or maybe I don't quite get what you are looking for??

VESA Desk stand

I have the 55 x950g and grey uniformity is very good. Also if the legs don't fit on your tv stand you can buy something like this

You could get something like this. I have bought one and they work really well. https://www.amazon.com/dp/B077MJZ6ZG/

This works great. TV Stand

Personally I’m not fan of the LG stands this includes the OLEDs, I bought a replacement stand on Amazon and I prefer the way it looks.

https://www.amazon.com/gp/product/B077MJZ6ZG/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

https://i.imgur.com/yRtFJA5.jpg

Undertstood, thanks for feedback everyone. There seems to be two different recommendations. Any advantages in this type of generic stand vs the set of generic legs?

I had this for my TV: https://www.amazon.com/gp/product/B077MJZ6ZG/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

the review says it works with their monitor so It could be an option plus it's on lighting deal for $23 in the US

It is not height adjustable. It's about 3 9/16" from base to bottom of monitor. The stand does feel a little clunky. I just ordered https://www.amazon.com/gp/product/B077MJZ6ZG/ as a replacement on the recommendation of this thread: https://www.reddit.com/r/ultrawidemasterrace/comments/jh1jgh/stand_for_a_34_ultrawide/

We'll see how it goes.

Deal link: Amazon

Coupon code: GPFJFPK8

NOTE: Are you looking for discounts on a specific product? Search for the product in our official Discord Server! We are gearing up for Black Friday and Cyber Monday! Grab the deals before anyone else! Join our Discord Server to get real-time notifications on all deals. We have category-wise Discord channels. Disclaimer: Some deal links on this sub may be affiliated

Easiest to use would probably be to get a generic stand:

https://www.amazon.com/dp/B077MJZ6ZG/

​

I have seen c8 bases on ebay also, but am not sure if they fit c9 (search for c9 base on ebay).

There are tv stands with built in mounts or you can get a mount separately and put in on top of whatever like this or that

Link a photo of your setup so we can give ideas on how to possibly place the Pioneer Center speaker.

If your TV is not already too high, a Table top TV stand to raise your TV to have room for a center speaker underneath.

Speaker Stand for Center Channel

Attach Pyle Speaker Wall Mount, Pair to the front of your TV stand.

How about... Hmm does that door really open up right there? Holy cow. Maybe check another wall like that guy said.

Anyways.

That's a Kallax shelf, right? I think you could double-wide a box by taking a divider out. There's your receiver, right in a double wide shelf in the Kallax. This also frees us the shelf to the side of the kallax where the receiver currently is for a subwoofer later.

AND EITHER

​

A.) Center the kallax if you can, center the tv on the middle of the kallax. Do the math on a shelf life this - https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/ref=sr_1_4?keywords=tv+stand&qid=1579067412&sr=8-4 See if you can get one that will raise the tv high enough to fit you L and R bookshelf under the tv on the shelf, get what I'm saying? Though make sure you measure your bookshelf and tv and everything to see if it all works because it might not get high enough. Boom you're done for like $30

​

B.) With the tv centered, whether or not the kallax is, wall mount your bookshelves to either side of the tv with something like this https://www.amazon.com/VideoSecu-Clamping-Bookshelf-Surrounding-MS56B/dp/B000X9O8SI/ref=sr_1_4?keywords=speaker+wall+mount&qid=1579067604&sr=8-4 make sure it'll fit your tv! boom done for $20

​

Do either of those work? Then you'd have some leftover chowder for a bluetooth receiver, make sure you get one with like APT-X or whatever good codec your phone supports, heck maybe throw in $20 or so on an accent light switch for the back of the tv the light might dig that.

Also you could do a lot to make it look better for free or near free. You kind of got a cable hell going on. You could get a pack of velcro cable tie straps and just try to hide all the cables.