NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-30''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80

Or for you 2nd vertical Monitor you can use this one too https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_api_i_inmeEb4THB3DG

Here's the link! Amazon.com: NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-30''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80: Computers & Accessories

​

It's $27.90 on Amazon US right now!

What about this

I was toying with the idea of using something like these.

Then the gear can be where I want it, with minimal effort...

I have two of these

NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-27''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80 https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_api_i_GY24EbY2ZSKEZ

Oh, well then my first response is still applicable. The monitor arms are pretty flexible. Maybe go for two separate articulating arms stands. Like these

NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-27''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_apip_xZKoGIGGWWzd6

NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-30''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80 https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_api_i_2xhsFbQAKB0AW

It says 30 but it holds my 38 like a charm, look more ate the weight limitations. Also fairly cheap

This is the one

Really easy to pry off the stupid looking brand decal. Mine is going strong after a year, but I'd be careful about maxing out that weight rating. Doesn't come with USB stuff, just has cutouts for cables.

They go on sale for $20, I'm waiting on that to pick up another 1 or 2.

NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-27''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80 https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_api_i_8JjpEb0W14VGZ

Works great!

Like this https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_apa_i_Cv8dFb4RT7ARS it's cheap but it'll get the job done

NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-27''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80 https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_api_i_2DM2Eb9SM4ZXJ

I have three of these. They are far from the best, but the price is right. They don’t go up really high, but a few blocks of wood get them where they need to be and they go low.

NB North Bayou Monitor Desk Mount... https://www.amazon.com/dp/B01AI2YGK4?ref=ppx_pop_mob_ap_share

Still figuring out the camera mount (and light mount). I would just use a small rig clamp, but I think it would eventually damage the monitors. Thinking I will probably attach the monitor to a board and the board to the mount.

https://www.amazon.com/dp/B01AI2YGK4?ref=ppx_pop_mob_ap_share

Thanks! It’s two of these https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_api_i_H03EEbQREAFEK

And the case is the NZXT H500 in white. Appreciate it!

This should be what you're looking for.

If the 27 inch monitor is too small for the FOV you want, finding a way to mount it closer to your face is probably the cheapest option for you. I don't know your setup but one of those movable monitor stands can help get the monitor closer if your wheel is in the way. I have my wheel clamped to a desk and this is my issue right now.

I have this exact monitor and use this arm for it.

https://www.amazon.com/dp/B01AI2YGK4/

I had an arm on the monitor I had prior to purchasing this one and it did not fit on since the mounting points are recessed into the back. Make sure the bracket you're using is squared. Here is the link to the one I had so you can see what I'm talking about, the corner corners aren't squared so it won't fit. https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_apa_i_qXatFbRAJYAPD

is what you are trying to eliminate that monitor-pulled-too-far-from-the-back-like-i'm-at-a-dining-room-table situation? I used to have one of those clamp on monitor arms kinda like this but cheaper and crappier (damn the nice ones are pricey!) but it made keeping my display where i needed it easy while keeping the desk clear for w/e so it felt like i had a large work area not wasted by a monitor splat in the middle.

This isnt for a vertical. But maybe set it off to the side and move it over? Closest I can find

NB Monitor Mount

I bought this and have had no complaints. https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_apa_fab_lN6yFb4GJSWEC

https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_sms_apa_i_rufSEbS04WJDT

I use a pair of these and have been really happy with them: https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/

EDIT: I should add, it does not come with thumbscrews, and I'd HIGHLY recommend buying some. The included screws are regular phillips head screws and it's very hard to use a screwdriver while trying to maneuver your monitor into position on the arm. M4x10mm is the correct size for more desktop VESA mounts

I have most of the same questions. I was looking at the Zenith 30" T frame, with a 60" x 30" laminate top. I will only be mounting 2 x 21" monitors with two of these: https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4.

I bought this very inexpensive one from amazon and I’m happy with it

It's an extremely common design that is slightly differentiated and marked by various different companies.

Here's one on Amazon: https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/ref=sr_1_6?dchild=1&keywords=single+monitor+arm+mount&qid=1596126078&sr=8-6

The laptop is the Razer Blade 14 2017 (Core i7 7700HQ with GTX 1060 6GB). The monitor is a Samsung C24F390. Just a general-purpose monitor with 1080p at 60hz. The stand could be found in this link.

Thanks! These are North Bayou arm mounts.

NB Arm Mounts

NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-27''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80 https://www.amazon.com/dp/B01AI2YGK4/ref=cm_sw_r_cp_apa_i_IkLoEb1R630CP

Here’s the Monitor Stand I have the same one. I love it. Works great for the price it is.

https://www.amazon.com/gp/product/B01AI2YGK4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I've got the clamp mounts holding 3 monitors to my desk. There's a few things you'll want to check first:

• Make sure you have VESA mounts on the back of your monitor. They mounting holes will be described by the spacing between them (75x75, 100x100).
• Make sure the back of your desk has space to mount the clamps. Some desks have a rear panel that doesn't provide enough room for the clamp to grip the surface.

Once you've check the above, you can use mounts that are more for a static setup or mounts that use gas/spring pressure articulating arms that can be moved for constant adjustment:

• Static setup monitor mounts use a pole from which a monitor mount is attached (like this). These allow for some adjustment (like monitor rotation), but generally you set the monitor and forget it. There are some that have long arms so the monitor is offset from the desk mount, but same idea. These mounts can hold from 1 to multiple monitors - just depends on which you get. I have these and since I don't move my monitors much, they're fine for me.
• Adjustable monitor stands have articulating arms that allow you to move the monitor around (like this). Gas or spring pressure keep the monitors in place after you move them without needing to tighten/loosen stuff, so these might come in handy if you are constantly rotating your monitors or have a desk that can go from sitting to standing - where you then want the monitor adjusted to a certain position. Generally, these are more expensive.

I have my monitor on an arm, and my laptop on another arm on a plate.

Arm: https://www.amazon.com/gp/product/B01AI2YGK4/

Plate: https://www.amazon.com/gp/product/B07RJZJVHF/

These are the two outer mounts and this is the center one.

All the mounts function great, but the first two have an ugly yellow logo so there might be some better alternatives. The center mount is great, no complaints.

Using some cheap monitor mounts off Amazon

NB North Bayou Monitor Desk Mount... https://www.amazon.com/dp/B01AI2YGK4?ref=ppx_pop_mob_ap_share

Dual Monitor Stand - Height Adjustable Gas Spring Double Arm Monitor Mount Desk Stand Fit Two 17 to 32 inch Screens with Clamp, Grommet Mounting Base, Each Arm Hold up to 19.8lbs https://www.amazon.com/dp/B0855ZBPXD/ref=cm_sw_r_cp_api_i_Y9YGFb35YD4SQ

Please. Am tech nerd https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4&ved=2ahUKEwiLrqyK1ZbpAhXDl54KHbQ5DAcQFjAAegQIBhAB&usg=AOvVaw0WkzP_-aM-aCwGODiIQMIJ

https://www.amazon.com/dp/B01AI2YGK4?ref=ppx_pop_mob_ap_share

https://www.amazon.com/dp/B07H8NHR8N?ref=ppx_pop_mob_ap_share

For the ultrawide: https://www.amazon.com/gp/product/B01AI2YGK4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

No clue on the other one, its a very basic one and got it a super long time ago.

https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4

Honestly OP is isn’t that difficult for you.

Buy this:

https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4 https://www.amazon.com/dp/B06W58KTYN/ref=cm_sw_r_cp_api_i_xVWSEbM63ZMHQ

This will remove the base of the monitor and free up space.

https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/ref=sr_1_2?crid=LSNC6LFPTK5&dchild=1&keywords=north+bayou+monitor+arm&qid=1594222325&sprefix=northbayou%2Caps%2C156&sr=8-2

https://www.amazon.com/North-Bayou-Monitor-Computer-Screens/dp/B01EHQL3LW/ref=sr_1_5?crid=LSNC6LFPTK5&dchild=1&keywords=north+bayou+monitor+arm&qid=1594222279&sprefix=northbayou%2Caps%2C156&sr=8-5

The same things at half the price. We use these at work, with a few that are over 5 years old, now. They might jump a little bit with a typical home floor, from running or something nearby, but they are not wobbly in the least (they are all mounted to 1" or thicker MDF desks, though, and a weak desk will be an issue with any arm mount).

I cannot vouch for any model, but if you are against a wall, you might do well with articulated wall mounts, instead of desktop mounts. Try to get one bolt in a stud, and then use togglers on the other side.

https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/ref=sr_1_5?crid=TK5ZL7B22P8C&keywords=north+bayou+monitor+desk+mount&qid=1583276998&sprefix=north+bayo%2Caps%2C160&sr=8-5 Here you go sir. hehe

This is the laptop stand and

This is the arm for the left screen

I use a North Bayou that I got off of amazon, they are like pretty cheap and work really well. There is an adjustment screw that you may need to turn to adjust for the weight so that it does not move up or down on its own. Under $40

​

https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/ref=sr_1_5?dchild=1&keywords=north+bayou&qid=1586963095&sr=8-5

Deal link: Amazon

Category-wise subreddits:

Is your reddit feed getting flooded with deals for products you are not interested in? Below are our category-wise subreddits where I crosspost from the main sub.

|Category|Subreddit| |:-|:-| |Electronics|/r/Deals_Electronics| |Grocery|/r/Deals_Grocery| |Video Games|/r/Deals_VideoGames| |Home Improvement|/r/Deals_HomeImprovement| |Clothing and Accessories|/r/Deals_Apparel|

Discord Server: Instant deal notifications on our Discord Server!

Amazon Canada Deals: /r/OnlineDealsCanada

Disclaimer: The deal links are affiliated. We may earn a small share on qualifying purchases. It does not affect the deal price in any way.

I personally use 2 of these - gives me more options for mounting than a fixed dual set up.

https://www.amazon.com/gp/product/B01AI2YGK4/ref=ox_sc_saved_title_6?smid=A2V6O7OTRZHL3U&psc=1

Actually I have two separate stands and the monitors are not laying on the speakers as it may look... simply the one stand is hidden behind the PC.
I've bought them locally but I think this is the one I use:
https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4

yes you are able to do that, recently posted my setup with monitors mounted that way on this sub here I would definitely recommend the North Bayou F80. Fantastic monitor arm at a great price :)

What you mean you can't find anything on Amazon?... Are you in the USA? Because there are dozens upon dozens of fully articulating mounts there.
For example Amazon Basics 25 lbs support...
NB North Bayou 20 lbs support.

Those are assuming you want full control... but if you just want it to sit there stationary then any simple desk mounted stand would do.

i would suggest 2 separate hydraulic monitor arms.

https://www.amazon.com/North-Bayou-Monitor-Computer-14-3lbs/dp/B01AI2YGK4/ref=sr_1_5?dchild=1&keywords=monitor+arm&qid=1597113727&sr=8-5

​

I have used those with 2 29 inch ultrawides then i upgraded one to the MSI 34 ultrawide and it does not have a problem just had to tighten the arms more then the 29