Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First

Dis is de way Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_api_i_RkSrEbVCTQGYJ

Where to buy Audio Interfaces?

I'm trying to get the Scarlett Solo but its sold out on amazon and every website I visit

​

Is there any other websites that I can get it from? Or do you recommend any other interfaces for around $100?

Running headphones from the keyboard out into any audio interface should work.

I was thinking something like this. Any good?

To connect an XLR condenser microphone to your PC you need something with a pre-amp that can provide 48V phantom power, and can convert the analog signal to digital. Sounds complicated, but the solution is very simple. You just need an interface, such as the Focusrite Scarlett. With this, you simply plug the mic into the scarlett via XLR, and plug the scarlett into the PC via USB. Done. There are plenty of other interfaces out there to choose from but most people choose the scarlett because it is a good bang for your buck and nice quality. There are various models with different numbers of inputs if you ever decide to expand your set up.

Yes the linked box will deliver the phantom power to your mic. You will need a second XLR cable to then run it to your MC4000 and the Mic 1 input. The diagrams on the amazon page show it hooking up to your computer's USB port but you can also use a 5v wall wart style plug with USB out, like a phone charger. The USB cable is simply delivering power.

If you aren't live DJing on your stream you might consider a small audio card like the Focusrite Scarlett. It runs on USB power, has built in phantom power and a big fat knob for monitor volume which is everything you need. It's a much smaller form factor than the MC4000. The caveat being that it runs on ASIO drivers so it's a little fiddly to get setup for streaming software to capture it at times but it does work. If you ARE DJing live, ignore this as you don't need an extra step between your MC4000 and the computer. No reason to complicate things.

sweet, what does the audio interface need to have? currently i just have a scarlett focusrite solo 3rd gen , which i dont think will work because there’s no midi inputs.

https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_apa_i_f4HIFbA0JRBHC

Thanks for the response!

Here is the one: https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=mp_s_a_1_7?dchild=1&keywords=scarlett+solo&qid=1598873090&sprefix=Scarlett+&sr=8-7

I'd recommend a Focusrite Scarlett Solo

[Buy this.](focusrite scarlett solo (3rd gen) usb audio interface with pro tools | first https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_apa_i_9YHtEbAKZ448K) You can get almost everything else you need for free online. The plugins won't be top shelf but if you're just doing it to learn or to dick around and have fun, there's no reason to spend $600 on top shelf software

You have a few options. A decent audio interface would give you low latency but doesn't include any effects and is much better for headphone playing. You would also need some amp plugins...lots of decent free ones but it requires some patience to set up.

The Boss Katana is the meme amp for a reason, you get several amps and effects in traditional amp hardware. It can also double as an audio interface. Black Friday deals would bring a 50-watt down to $200.

I think that, maybe, you are describing the "master gain ( or volume) " adjustment

What you need to find ( I think ) is the "input gain" adjustment for your microphone alone.

I took a look at your Focusrite Scarlett Solo online since i am not familiar with it, and it has an input gain knob on the left
( over the 48V phantom power switch --that's on right? I think your mic needs it, not sure)
and a larger master gain knob on the right.

I assume that you have some kind of software that goes with this unit, on your computer, that will allow you to have input meters since the focussrite does not have them -- sorry I'm not familiar with this unit at all.

What software are you using? Did it come with the focusrite? I still suspect you need to rotate your input gain up, the trick is that if you go too far you will hit zero and get clipping ( distorted sound )

Your English is better than many Americans, so don't worry about that! (~):-]

I know some music but very little about vocals and zero about podcasts so your friends' ideas may be better. The mic in your post seems very reasonable though. You can get good sounds from a mic to an audio interface unit to your computer's USB port. It works well with music so I think it would be the same for vocal only recordings.

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=sr_1_1?crid=1E7O10IG920BC&dchild=1&keywords=focusright+scarlett+solo&qid=1598079135&sprefix=focusright%2Caps%2C175&sr=8-1

You could get a 2nd opinion on something like this.

And the background noise, could it be your recording volume. You should be able to see a meter in Audacity that shows how much the mic is picking up. If you are recording really low and then raising the volume later, then that could account for the extra noise. Can you get a cleaner recording if you raise the mic recording level?

I got this for when I DM my dnd game but I recently got a bass again (first in almost 20 years) and was really surprised at how clean the input was straight from the bass. Would definitely recommend if you’re looking for something cheap.

I’d actually recommend the Focusrite Scarlett Solo since it’s half the price.

Thanks!

The mixer used to work fine before, I stopped using it for a few months and then a hum developed. It could be possible the issue isn't with the mixer right? I don't mind having a couple add ons (I already spent the $150 on the cloudlifter a year ago). I just want to know if the hum eliminator would play nice with the cloudlifter.

I guess I can upgrade the mixer though, I don't see the AG03 on amazon, but there is an AG06, can you recommend that one too?

edit, also is the scarllett unit you were referring to? https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=sr_1_1?dchild=1&keywords=Scarlett+solo%2F2i2&qid=1589302800&sr=8-1

Thanks again for all your help!

So I could connect my guitar directly to something like this then just to my computer?

https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_apa_fabc_ezo3Fb3PTXR1N

Or do I need a preamp and amp. Again I know nothing about this stuff.

I would recommend the Focusrite Scarlett Solo for any beginner or intermediate musician. It’s perfect to work with and easy to use and not mention has a damn good sound

Not to be a killjoy but on amazon its being sold for 110 brand new Amazon link

Switch on the headphone out is just to change from whatever the system is currently playing back to whatever is coming into the inputs. It only supports a single stereo channel output from the system. You can see the i/o options for the various models in the chart on this listing: www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB

As far as I know, the lowest level Focusrite with 4 channel (2 stereo) output is the 4i4. Great unit. I have a first gen 2i4 that's still kicking around and was using it until I picked up my Denon MC7000.

You will want to get a digital audio interface to use with that mic. Something like this:

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB?ref_=Oct_s9_apbd_orecs_hd_bw_boEu3&pf_rd_r=GQEBZ63SV9D4K32V0N97&pf_rd_p=d8a7fefc-c459-5067-89ba-b098729690f7&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=11973691

It will be less quiet and will reduce the noise of your recording.

I know that digital audio interface is expensive, but that is the tool you need if you want to start searching for other ones.

Noob here. I'm looking to get an Audio Interface to plug into my laptop. Is there any reason not to go for this "Amazon's Choice"? Says it would work for a bass, looks like I can plug my bass directly into it, then use a USB cable to connect the interface to my laptop? I use Linux so I'm not sure if the software it comes with will work, but I'm really just looking for the hardware.

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB

No, you would want this and a balanced cable for the best performance. It is possible though with rca to trs

Are you talking about this thing? https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB

If so, it appears to have RCA line-level outputs, which you can connect to the RCA inputs of whichever reciever you choose.

Only slightly more. Scarlett Solo

Only slightly less. Presonus Audiobox

Here's and arm and here's and interface.

[QUESTION] Difference between audio interface system vs guitar to usb

Hey guys. I'm a relative beginner who's been playing for about a year so I apologize in advance for some basic questions I have. I'm having a lot of fun with it and want to spend some time messing with making my own music on a computer. I have a couple questions.

1. From the research I found, there is no possible safe way to plug the 6.5 mm jack into a 3.5 mm jack from my electric guitar to my laptop without some possibility of damaging the computer or guitar. Can someone confirm that because I have seen youtube videos of people seeming to be doing that?
2. From that, I found I have to buy an audio interface to connect my electric guitar to my PC. My main question is what is the difference between an audio interface system (Like the Focusrite Scarlet Solo I keep hearing about) and a simple guitar to PC cable?
3. Once I have the correct way to connect my guitar to PC, what kind of program should I download? I have an interest in messing with making some lofi music with my guitar, but I really don't have the money to spend a lot of money on programs or gear with my grad student budget. My friend who make music suggested purchasing FLstudio or Ableton, but since I'm just trying it for the first time I want to try some easy free programs before spending real money on quality music production programs.

Since I know nothing about this, if I am getting terms mixed up please let me know. But I appreciate all the advice and feedback in advance. Thanks!

I would avoid usb microphones. They tend to cut a lot of corners in the electronics in order to hit a “budget” price point.

I would buy a decent usb audio interface. The Focusrite Scarlett Solo is currently $109 on Amazon. (Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_api_i_bmQxFbJX2GGD2)

Then get a large diaphragm microphone and run it through that interface. The MXL 770 is currently $79 and comes with a shock mount. (MXL Mics 770 Cardioid Condenser Microphone https://www.amazon.com/dp/B0007NQH98/ref=cm_sw_r_cp_api_i_flQxFbJEVH1V7)

This setup is really close to your budget and you can always upgrade either component in the future.

Hope this is helpful!

Another question - I've purchased this Scarlett interface for my crappy starter guitar and I want to achieve a lead guitar tone very similar to this one (starts in a few seconds)

This can be done with software alone with no need for pedals, right? Am I missing some big crucial piece here? Do the cords matter at all? I don't imagine they do as it's just an electrical signal but who knows.

An electric guitar sound with no processing or amplification just sounds like a cruddy acoustic but the amount of pedals, effects and software is overwhelming.

So for a RODE NTG microphone you're gonna need an XLR cable, something like this: https://www.amazon.com/dp/B01JNLTTKS/ref=cm_sw_r_cp_apa_i_AtxwEbBVT850S

Now if you're trying to connect it to a computer your going to need an audio interface like the Focusrite solo https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_apa_i_VvxwEbE3ZTDBB

I use a focusrite Scarlett solo. They cost about $100. I use the Plini plug-in that I purchased and have no latency issues.

I have an lenovo ideapad flex with an i5 8th gen processor and 8 gb of ram. I can run getgood drums in kontact player and have about 20 tracks before I have any popping or issues. Then I freeze the tracks I'm not gonna use and it solves that problem.

Here is a simple track I recorded using Plini plug in and getgood drums. First thing I've wrote or recorded in 7 years.

https://www.bandlab.com/posts/423626be-f088-ea11-a94c-0003ffd19c0f

Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_wa_apa_i_ctdVEbPEHM937

There's a general minimum of "stuff" one might need to start recording.The typical setup would be at the least an audio interface (here's a common one:https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=sr_1_2?crid=F3FJ6IK0VAQB&dchild=1&keywords=audio+interface&qid=1603595941&sprefix=audio+inter%2Caps%2C297&sr=8-2) to connect your guitar to your computer. Sometimes some people just do this and use digital amp modelers to process the guitar signal.A setup with more stuff would include a mic for recording a physical amplifier (an sm57 or an AT2020 would be fine for tracking stuff, they're common multipurpose mics, albeit one is a dynamic the other is a condenser).If you have self-taught yourself guitar, you can self teach yourself DAW stuff. Lucky for you, if Ableton is the DAW you want to use, there's a whole lot of Ableton tutorials online. The learning curve may be weird for someone who is brand new, but you'll find it's easier to get into a groove of recording with time/practice.

If you'd like more info, feel free to PM me.

Source: I've tracking on multiple DAWs for a few years now.

if the audio is worse why is it 50$ more?

so this is my mixamp https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=sxin_4_ac_d_rm?ac_md=2-2-Zm9jdXNyaXRlIHNjYXJsZXR0IHNvbG8%3D-ac_d_rm&cv_ct_cx=at2035&keywords=at2035&pd_rd_i=B07QR6Z1JB&pd_rd_r=6d422668-492e-4271-a15d-bdb946608070&pd_rd_w=PHlpM&pd_rd_wg=E2dMP&pf_rd_p=de19e82a-2d83-4ae8-9f5c-212586b8b9a0&pf_rd_r=KNW3RWPGZ9V77P49RAFG&psc=1&qid=1582814157

​

I think it has phantom power already so would I need to buy something else for it?

it also does have a headphone output.

​

so the only thing I would need is an attenuator cable to make this happen?

​

attenuator cable into my scarlet headphone slot and also connected to my m50?

I use the Focusrite Scarlett Solo and have it taped under my desk (it’s really dark but you can see it on the right side under the headset with the red and green lights). The headset I use is the Audio-Technica ATH-M50x.

I have this one coming next Tuesday https://www.amazon.com/dp/B01M7SSTXL/ref=cm_sw_r_cp_awdb_t1_mgLNEbN28YFCF but I'd love to know more about your setup. I got one of these as a Christmas gift from my wife https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_awdb_t1_njLNEbYZH6YJK I feel like I'm just scratching the surface.

Hi thanks so much. So first I'll try moving my setup around, but if that doesn't work I'll try the balanced approach. So you would recommend this and 1 or 2 of these?

does the soundcard in question have any knobs? The mic is quiet even if you crank the input gain? How's the recording volume setting in windows? And you do have the mic close to your mouth (or whatever sound source you're trying to record)

If all that was in check, maybe consider a better audiointerface? Something like Focusrite Scarlet (https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB?th=1) or Presonus ione (https://www.amazon.com/PreSonus-AudioBox-iOne-Audio-Interface/dp/B00KBMAJU8) are pretty popular.

Here is the link to the amp I got:

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB ref=mp_s_a_1_3?keywords=scarlett+solo&qid=1577846838&sprefix=scarlett&sr=8-3

Here the link to the headphones im talking about:

https://www.amazon.com/beyerdynamic-770-PRO-Studio-Headphone/dp/B0016MNAAI/ref=mp_s_a_1_1_sspa?keywords=dt%2B770%2Bpro&qid=1577846955&sprefix=dt%2B&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzQ1JPVkVVVzJWQ09XJmVuY3J5cHRlZElkPUEwMzE0OTkwMThYMU1YVzJYVjM4SSZlbmNyeXB0ZWRBZElkPUEwNzk2NTYxSkc0WjJVSVYzOTMyJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1

Mostly any cheap USB audio interface or mixer will get you going.

A lot of people chose something like this. https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/

It you want quality on a budget to use with a solid entry level mic like the AT2020. If you are looking for a higher end audio interface.

Micing a spider is weird, I've tried to do it before but it just doesn't sound right no matter what I did. I would highly recommend getting a guitar amp VST like these. They go on sale fairly often. If you're on a strict budget I'd wait until we get closeer to black friday when they're almost guaranteed to have a sale and scoop one up. Then all you need is an interface like this one and you'll be set. Even if you have no idea how to dial in a guitar amp VST and just set the knobs randomly the tone will be better than micing up a Spider amp.

That's a "Lavalier" mic. It's meant to be very close. You might be getting his becuase your don't have your gains set very well. The closer you get to a mic, the lower you can set your gains, the less background noise and hiss you'll pick up.

When I said "condenser mic" I meant [something like this] (https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B07JM5FLVF/ref=sr_1_6?crid=1PVC2C71J2ET1&keywords=vocal%2Bcondenser%2Bmicrophone&qid=1583176272&s=musical-instruments&sprefix=vocal%2Bconde%2Cmi%2C163&sr=1-6&th=1), powered by a clean 48v phantom power interface like a Scarlett.

There's a HUGE difference in cost for wanting clean LIVE audio, and "clean enough" audio that you plan to have time to edit to clean up.

I know this one is a bit over budget, but would this work? https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=sxin_2_ac_d_pm?ac_md=4-1-QmV0d2VlbiAkMTAwIGFuZCAkMjAw-ac_d_pm&cv_ct_cx=audio+interface&keywords=audio+interface&pd_rd_i=B07QR6Z1JB&pd_rd_r=abdfaff5-1e5d-40de-8915-8f7009401a65&pd_rd_w=3JpHR&pd_rd_wg=0oioQ&pf_rd_p=0e223c60-bcf8-4663-98f3-da892fbd4372&pf_rd_r=98C9YDGZEQD4718C432V&psc=1&qid=1584456102&s=electronics

You'd need an interface to record audio directly to your computer. Something like this with a jack input:

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB?ref_=BSellerC&pf_rd_p=9787165a-4e86-5ec8-99fd-dc7c93cc8769&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=11973691&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=F2QST81MGPEDJTEPCH34&pf_rd_r=F2QST81MGPEDJTEPCH34&pf_rd_p=9787165a-4e86-5ec8-99fd-dc7c93cc8769

I would also look into ezdrummer or superior drummer 3 (which has a preset for the td-17 that takes advantage of all the possibilities of your hi-hat and snare) and sounds much better than a td-50. I dig my TD-17, but for recording, there is no comparison with drum software and any drum module samples.

You'll need a USB-A to USB-B (printer style) cable, preferably at least 5m to send MIDI out which will trigger the samples on the drum software.

Adding to share that I'm looking at the possibility of buying this microphone: Shure SM58

And this interface: Focusrite Scarlett

Unless you're just podcasting or streaming it's best to avoid USB mics. That said the Scarlett mic in that other package isn't great. Get a dedicated audio interface - the Focusrite is fine, if you only need one mic input then get the smaller one and pair it with a mic like this or if you have to go cheaper, something like this.

I don't understand this. The monitor volume knob on the front of the interface? Is that not what you mean?

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=sr_1_6?dchild=1&keywords=scarlett%2Bsolo&qid=1601935848&sr=8-6&th=1

Gotcha! I'll look into interfaces with 1/4" inputs that with outputs compatible with my PC!

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB?ref_=Oct_s9_apbd_simh_hd_bw_boEu3&pf_rd_r=DHY23PSHCPQERKVC5RJ2&pf_rd_p=d8a7fefc-c459-5067-89ba-b098729690f7&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=11973691
Do I need an interface with preamps built in if I have a preamp? And does an external preamp do better than this, or if I get this should I just use its preamps?