3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D
Below are the top discussions from Reddit that mention this Amazon listing.
Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament
- No polishing needed, printing at a high detail results in a beautiful finish.
- Highlight silk pla filament multicolored color.
- Nice shiny Metallic Special Rainbow Multi Color Gradient
- Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament
- The change from one color to another is random.
Reddazon may receive an affiliate commission if you make purchases on Amazon.com through this site. Thank you for using these links to support Reddazon.
CC3D
Reddit Posts and Comments
0 posts • 43 mentions • top 33 shown below
6 points • Hoof-Art
https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_apa_i_popfFbVDRJYHA
3 points • illegal-bacon
CC3D silk rainbow PLA
Edit: Link https://www.amazon.com/Multicolor-Filamentt-Mulitcolor-Multicolored-CC3D/dp/B07PYDNQXS/
6 points • BrownieSampler
So I used this filament: https://www.amazon.com/gp/product/B07PYDNQXS/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
​
But honestly I think their is waaaayyy to much yellow and gold. I wound up cutting a bunch of it off an only left a few M of that color of it before it changed to red.
2 points • zodiacvalley
Silk Rainbow PLA https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_apa_i_BC3hFbDGHX1Y0
2 points • AWildAnonHasAppeared
https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_api_i_UNBiEb3AZ42CV
2 points • TheGingerSn4p
I believe its this one right here and I'm assuming op has printed past the first gold part. I have that and the colors are the same.
1 points • Legionofdoom
Looks like it's because they used this filament.
1 points • DFtin
https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_api_i_JbmlEbWGTMKMW
1 points • KumoKumori
3D Printer Silk Rainbow... https://www.amazon.com/dp/B07PYDNQXS?ref=ppx_pop_mob_ap_share
1 points • uid_0
No, but take a look at the pictures in the reviews for it: https://www.amazon.com/Multicolor-Filamentt-Mulitcolor-Multicolored-CC3D/product-reviews/B07PYDNQXS
1 points • xenon_rose
I just got some and it’s gorgeous and is printing well for me: 3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_api_i_h9OgEbVR97708
1 points • MrBone66
https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_em_apa_i_WqHjEbHZ3HVZE
1 points • BigDaddyMantis
Thanks. It's this kind found here
1 points • chapunicus
Took about 13hours scaled to 200%. The model was not designed correctly so ensure the first layer sticks you need to adjust model by -0.4 on the Y axis.
No supports were used. And I used the multicolor silk from amazon at 200C and 60C bed.
1 points • auto_egr
I have a low poly vase going at home with some updated settings (no temp change) so I will post a pic of that providing it doesn't fail :) it's this rainbow filament from Amazon. Keep in mind the color change is slow on small parts but there are other spools that change color quickly in comparison.
1 points • festivegadfly
3D Printer Silk Rainbow... https://www.amazon.com/dp/B07PYDNQXS?ref=ppx_pop_mob_ap_share
1 points • esworp
i was positive it was going to be crap, what for the highly sketchy amazon listing.. but it's actually printed wonderfully.
1 points • alaricat
Ender 3, silk pla, Cura and what do you want to know about it? It's 0.12mm layer height, 0.4mm nozzle, there are lots of parameters
1 points • dan_the_murc_man
3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_api_glc_fabc_EL53FbS9RGP66?_encoding=UTF8&psc=1
1 points • Maserb5
It’s a no name rainbow silk pla.
3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_api_i_ywZjEbGP1251N
1 points • ClintorisMaximus
No clear coat. I used rainbow silk PLA This Stuff
1 points • Horvaticus
Thanks! And haha, yep, I used some super generic PLA rainbow filament from Amazon. I'll keep an eye out on it, but the fan shroud on the FTW3 is about as huge as the original Xbox. PETG would have been a better choice, but there's no rainbow PETG to my knowledge. I wanted maximum RGB
1 points • hurcor
I've unclogged the nozzle about 4 times already with about a weeks worth of print time. I would blame filament but it has 5 stars on amazon... maybe need myself a dehydration chamber or something, I'm in the pacific northwest.
1 points • DesignFlaw06
It's part of the rainbow transition filament. Actually, that spool was a Reddit Secret Santa gift. I believe it is this one here: https://www.amazon.com/Multicolor-Filamentt-Mulitcolor-Multicolored-CC3D/dp/B07PYDNQXS/ref=sr_1_8?dchild=1&keywords=rainbow+pla&qid=1605018211&sr=8-8
1 points • Wintaru
The filament: https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_api_i_7TkMEbRBP3NB9 guessing everyone knows the stl but I can post the thingiverse link if needed.
1 points • DwideSchrude47
This is the link: https://www.amazon.com/Multicolor-Filamentt-Mulitcolor-Multicolored-CC3D/dp/B07PYDNQXS/ref=mp_s_a_1_3?keywords=silk+pla+rainbow&qid=1578796429&sr=8-3
1 points • jgleat85
3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D https://www.amazon.com/dp/B07PYDNQXS/ref=cm_sw_r_cp_api_i_meiXEb51H67JH
Unfortunately, it looks like the filament has been temporarily unavailable.
1 points • darkgnat
I used CC3d'a https://www.amazon.com/gp/product/B07PYDNQXS?pf_rd_p=ab873d20-a0ca-439b-ac45-cd78f07a84d8&pf_rd_r=0RD2FCWB46Q0SX4YXVWR&th=1
The final product came out perfect with it. No issues at all.
1 points • Bowwing
No not that one. This one https://www.amazon.com/gp/product/B07PYDNQXS/ref=ox_sc_act_title_1?smid=A2C1N81RZRXDYF&psc=1
1 points • Atotallyrandomname
https://www.amazon.com/gp/product/B00J0GMMP6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 at 190 with the bed at 60
https://www.amazon.com/gp/product/B07PYDNQXS/ref=ppx_yo_dt_b_asin_image_o03_s01?ie=UTF8&psc=1 at 210 with bed at 65.