TP-Link 8 Port Gigabit Ethernet Network Switch - Ethernet Splitter | Plug & Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Limited Lifetime Protection (TL-SG108)

For just 4 more dollars you can get an 8-port Switch from the same brand and type.

[Networking] Metal Metal TP-Link 8 Port Unmanaged Gigabit Ethernet Switch $18.99 ($39.99-$21.00)

I got a TP-Link TL-SG108 a week ago based on recommendations, but didn't get to use it yet.

I've been using these for a while. Absolutely no problem whatsoever.

TP-Link 8 Port Gigabit Ethernet Network Switch: https://www.amazon.com/dp/B00A121WN6/ref=cm_sw_r_cp_api_i_hlAuFbHEWHZEW

> How would i go about doing this without causing DHCP issues?

You could fiddle with this and make it work. But your better bet is to get a simple $20 gigabit switch. Run an Ethernet cable from your router to your switch, then more Ethernet cables from the switch to your other devices.

Hard to tell, it could be wired up any number of ways according to your school's network requirements.

Recommend you buy an unmanaged Gigabit Ethernet switch like the one one below to share the connection. Connect one cable from the switch to E1, E2, or E3, then you'll have 7 additional ports available to plug in all of your devices, plus the other 2 EX ports that aren't connected to the switch.

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/

TP-Link 8 Port Gigabit Ethernet Network Switch | Ethernet Splitter | Plug and Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Lifetime Protection (TL-SG108) https://www.amazon.com/dp/B00A121WN6/ref=cm_sw_r_cp_api_i_LlM8EbWTW0M34

Out of curiosity, without the $2 discount, why would you get this product over the metal casing one? I would imagine metal is a bit sturdier and dissipates heat better. I own the 5-port and 8-port metal ones, and love them.

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6

You know that a home gigabit switch costs like $20 right? Don’t overthink this, use a switch.

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=sr_1_3?crid=38OID9SSA49UT&dchild=1&keywords=gigabit+switch&qid=1602402896&sprefix=Giga%2Caps%2C234&sr=8-3

I have an 8-port TP-Link switch. No complaints.

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6

They make a 16 port switch as well.

Yes I do, it'll depend where you are in the world, but I'm guessing you are in the US.

I really like TP-Link for basic unmanaged switches, they are cheap, solid construction.

TP-Link 8 port Gigabit Switch

NETGEAR is also a good brand. You can find them at Walmart, Staples, Best Buy, etc so if you just want to pick it up in person.

There are switches that can be powered over an ethernet cable, but they are a little more expensive, and you need another piece of equipment (PoE injector) or another device that can provide the power. However, you'll probably get one with a little power cable that plugs into a normal power outlet.

In case you missed it, I added more about gig speeds to my post above this one. I'll post it here too:

Also, NO wifi reaches 1 Gig speeds unless you set up very specific (perfect) circumstances, they all get around 350-600 Mbps. Wifi devices don't usually need more than 30 Mbps. The only way you get to gigabit speeds is if you are wired in. This is normal for all wifi systems. It's not like Wifi is slow, it's just that gigabit is extremely fast, far faster than what most home users need. If you switched to, for example, 300/300 speed, I'd bet heavily that you won't notice any different, your Wifi could "keep up", and you'd save money that way too.

>It would cost me $99 to get one more wired port, and $45 to get a second. I will likely attend from the basement on occasion. Is the speed improvement by having them directly wired worth that additional cost in your opinion?

Yes. Wired devices perform at maximum speeds, and allow anything that can be wired to get wired. You can add a switch to any wired port, and that expands it so you have multiple ports. Here is an example of a switch:

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/

Keep that in mind. You can put a switch anywhere you have an Ethernet port, including where you put your wired eeros, and then wire a whole bunch of local devices too. You should wire everything you can - TVs, game consoles, desktops and laptops. That is the way you reach gig speeds.

I don't know your family situation, but if you have kids or ever have them in the future, and they want to use the basement as a "hang out" (spouses do this too!), then you'll be glad you wired the basement.

As for 1 vs 2, sometimes people do 2 just in case anything ever goes bad with the first wire. Then you have a backup. But as pointed out, you can always turn a single wire into multiple connections by using a switch, as linked above (correctly this time). 5-port, 8-port, and 16-48 port switches all exist, so once you have a single Ethernet connection somewhere, you actually have as many as you need for that area.

So 2 wires if you want a backup, one if you think it'll be fine and then just use a switch. If it were me, I'd pay the extra $45 for the backup, and sleep well knowing I have that backup in place.

I use this one off Amazon. Gig switch hardware has been around a LONG time. No need to get fancy right now. If you foresee needing more ports get a 16, or put an 8 in your main panel and an 8 in each room.

I can help offer any advice about placement if you need.

> I still would prefer dedicated ethernet ports

Those are dedicated ethernet ports. If you need more jacks at that location, then just add a network hub. I bought two of these recently.

https://www.amazon.com/gp/product/B00A121WN6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Here ya go, this will do well for your application > https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=sr_1_3?dchild=1&keywords=tp+link+switch&qid=1590892662&sr=8-3

You could just buy an 8 or even 10 port gigabit Ethernet switch for $20 and plug it in. Same performance if it was built in or not.

TP-Link 8 Port Gigabit Ethernet Network Switch https://www.amazon.com/dp/B00A121WN6/ref=cm_sw_r_cp_api_i_e.DGFbJY6CQ9M

I think you're looking for a switch. More or less just splits a signal.

Something like this?

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6

Literally just pick a port for the signal in, plug the rest of the devices into the rest of the ports.

DO NOT PLUG ONE CABLE INTO TWO PORTS, YOU WILL CRASH YOUR NETWORK UNTIL YOU FIGURE OUT WHAT YOU DID AND UNPLUG THE CABLE. Then your network will go back to normal, possibly after turning it all off and back on again, I don't remember if that's usually needed.

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6

TP-Link makes some quality switches without breaking the bank

Unmanaged switch

Here’s what I have: TP-Link 8 Port Gigabit Ethernet Network Switch | Ethernet Splitter | Plug and Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Lifetime Protection (TL-SG108)

https://www.amazon.com/gp/aw/d/B00A121WN6?psc=1&ref=ppx_pop_mob_b_asin_title

If the switch is the issue, let me know which one I should buy...

This is no better than one of these right?

What you're looking for is called a switch. It is literally designed specifically for your problem!

Here is one of the most popular switches on Amazon.

Here, I found one for cheap

Just use the att one for now. Put a switch inside the metal box.

https://www.amazon.com/dp/B00A121WN6/

Then put APs around the house. The more the better.

Two $50 APs are better then one $300 router.

I'm guessing a bit here, but the router will have 2 Ethernet ports 1 will connect to the modem. Then buy a gigabit network switch, 5 port and 8 port switches are the most common and tp-link sells high quality ones for about $20. I would get the 8 port switch for the couple dollars extra so you have more options in the future. Plug the second Ethernet port on the router into the switch then plug all other Ethernet devices into the switch. You might see managed and unmanaged switches available, for you setup get unmanaged and it should make it plug and play. The router will show your gaming PCs as connected directly to it over ethernet.

Edit: get this one, I have the same model, it's got a good build quality and works well

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=mp_s_a_1_1_sspa?dchild=1&keywords=8+port+switch&qid=1598570295&sprefix=8+port+sw&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTjlTR0hKN1lNWkJWJmVuY3J5cHRlZElkPUEwMjE2NjEyMTdXNkZINUFQSTY1RiZlbmNyeXB0ZWRBZElkPUEwMjQ0MDM2MlQySlhENFhVQUI3USZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

Make sure it’s 10/100/1000 if your internet speed is more than 100mbps. A 10/100 switch/ router will max at 95mbps

Edit. I use this one, and it’s perfect for my needs.

TP-Link 8 Port Gigabit Ethernet... https://www.amazon.com/dp/B00A121WN6?ref=ppx_pop_mob_ap_share

Not sure where you are located... But these work well and have a lifetime warranty. They are un managed and have Sturdy Metal Case: Fanless quiet Design, desktop or wall mounting Design.
https://www.amazon.com/gp/product/B00A121WN6
They also have a managed version for $11 more.

Something like this, right?

Link

You'll need to throw a switch in there and then connect each port you want to use with ethernet (patch) cables to the switch.

Currently you have the router in the living room and you plugged it in the wall outlet. This port will go to the closet you posted. The yellow cable connects the router to another port. If you want to use multiple ports at once: add a switch.

This would do the trick:

Switch: https://www.amazon.com/dp/B00A121WN6/

Cables: https://www.amazon.com/dp/B00HDUOPBK/

You should consider swapping it out for a more small modern switch when you have the money, that would most likely improve your speeds by a decent portion and they are rather cheap.

(This for example)[https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=mp_s_a_1_1_sspa?dchild=1&keywords=network+switch&qid=1593963686&sprefix=networ&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExNEc5RjY3TzZSMllLJmVuY3J5cHRlZElkPUEwODk5NTUzMTlTUTg2TzhTQTBZTiZlbmNyeXB0ZWRBZElkPUEwMjQ0MDM2MlQySlhENFhVQUI3USZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl]

what you want is a gigabit switch. you shouldn't connect multiple routers to a router unless you've got a good reason to.

Any unmanaged switch would work...foe example:

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6

/u/dredbeast got it. Easiest way to light up every ethernet port in your house is to buy a cheap 8 port switch like this and then connect all the blue ethernet cables to it. Then connect the cheap switch to your router down below with another ethernet cable and you're good to go.

If you don't want to have get a switch and really just care about that one port, plug the blue cables directly into the router one by one until you can identify exactly which blue ethernet cable is the one that matters.

https://www.amazon.com/gp/aw/d/B00A121WN6?psc=1&ref=ppx_pop_mob_b_asin_title

this is what I'm using, no issues, half the price for half the ports

Luckily they're cheap af

Just buy a switch - They're cheap and easy to use.

If you're going to build a router, I'd suggest a Qotom with a pFsense install or.. really whatever other software you wanted to install.

Test port 4 with a different wired client to confirm it's not a client issue.

There could be a small chance your router configuration may be corrupted enough to be messing with trafflic flow from that port. Next thing I would do is factory-reset, twice, and re-configure the router from scratch.

Beyond that, it could be a dead port. As a workaround, you could connect a cheap 8-port switch (example) to one of the ports that do work (port 1-3), but ultimately you may just have to replace the router.

I will stop you here- each coax port will need its own routing equipment. The typical plan is to connect a headless (or, one without any kind of software or controls) switch from the (traditionally yellow) Internet port to your switch, allowing you to have more ethernet ports than are available on your router. Your router should also have some non-yellow ports that will provide ethernet service.

Cable companies will typically pick one coax port in your home because it has the lowest signal noise- the amount of electrostatic noise on the line that interferes with the signal. While an electrician can lower this for a port, this takes time and money, so the telecom worker would much rather just take the best reading and use that port, rather than proofing all the ports in your house for service, since it can be expensive and time-consuming.

Any Amazon Netgear/TP Link special will do the trick.

I have a few of these. They're cheap and do the job. One of them has been dropped multiple times and has no issues.

https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=mp_s_a_1_2_sspa?dchild=1&keywords=NETGEAR%2B8%2Bport&qid=1607148852&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFMSVAyRTRZSFU2S1EmZW5jcnlwdGVkSWQ9QTA1NDIzMzgyUjlSTzFJUzBRQlBLJmVuY3J5cHRlZEFkSWQ9QTA1NzMxMDgzVUI4VzlKRUNYMjlDJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1

You could get an Ethernet switch, just make sure it has auto-mdix so you don't have to change your current cable to a crossover cable. The linked one has everything you need.

https://www.amazon.com/dp/B00A121WN6/

Deal link: Amazon

^^Note: ^^The ^^deal ^^may ^^have ^^expired ^^by ^^the ^^time ^^you ^^see ^^this ^^post.

What about this one?

TP-Link 8 Port Gigabit Ethernet Network Switch - Ethernet Splitter | Plug & Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Limited Lifetime Protection (TL-SG108) https://www.amazon.com/dp/B00A121WN6/

Just get some cheap 8-port gigabit switches from netgear or tp-link. This one is $22

Will this work: https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=sr_1_5?crid=2EO3DES6U9EM2&dchild=1&keywords=tp+link+switch&qid=1595253660&sprefix=tp+link+sw%2Caps%2C186&sr=8-5

You'll want something like this: https://www.amazon.com/dp/B00A121WN6/ref=cm_sw_r_cp_apa_i_13FiFbE187YTY

If the wifi signal is strong throughout the house why not just get an 8 port switch and hook that up to the wif router? The one port from the modem stays connected where it is to the router, one of the ports on the router connects into the switch, the five ethernet cables plug into the switch, the router handles all the dhcp/dns/etc, and you have 2 spare ports for future if you ever feel like adding anything to the closet or in the house. You can get one for 22 on amazon. Link

Totally doable but your AP has to be able to be able to be configured as a "wired extender."

The Apple Airport base stations suck at that (they don't really do that. Something like the Linksys RE7000 or RE9000 work pretty good if you don't go beyond about 500Mbs.

I use a TP-Link Gb switch which costs about $17 on Amazon: https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=sr_1_3?dchild=1&keywords=tp-link+gb+switch&qid=1601516363&s=electronics&sr=1-3

Oh, as long as the network traffic is not continuous from any one source, you probably won't notice any bandwidth reduction due to the switch. We stream TV (hardwired ethernet to Apple TV 4K and have a wired access point for our devices (WiFi).

Hope this helps.

These should be fine:

Metal case: https://www.amazon.com/Ethernet-Splitter-Optimization-Unmanaged-TL-SG108/dp/B00A121WN6/ref=sr_1_4?keywords=gigabit+switch&qid=1582241031&sr=8-4

Plastic case: https://www.amazon.com/TP-Link-TL-SG1008D-Unmanaged-Gigabit-Network/dp/B001EVGIYG/ref=sr_1_7?keywords=gigabit+switch&qid=1582241031&sr=8-7

A breakdown of the differences https://community.fs.com/blog/managed-vs-unmanaged-switch-which-one-can-satisfy-your-real-need.html

How many ports do you really need?

If you’re balking at the $50 low end managed switch I just grab something like this $20 unmanaged one - TP-Link 8 Port Gigabit Ethernet Network Switch | Ethernet Splitter | Plug and Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Lifetime Protection (TL-SG108) https://www.amazon.com/dp/B00A121WN6/

Any switch will do the job or if you want to split you can get as well. I recommend spending the money on a switch.

Best option:

8port switch (Amazon \~ 20 USD)

​

This will let you toggle between two devices:

Splitter (Amazon \~ 7 USD)