Command Picture Hanging Strips Heavy Duty, Large, White, Holds 16 lbs, 14-Pairs

Note: even things like framed paintings/pictures can be reflective... basically anything with glass. Sliding glass doors, too.

Might have to hang a blanket or sheet over these things. I got giant pieces of cardboard from work and put these on them which are like velcro but better. Makes it really quick and easy to put them up and take them down.

Here. There are several variations based on the weight they can hold up: Command Picture Hanging Strips, Decorate Damage-Free, 14 pairs (28 strips), Indoor Use, White (PH206-14NA) https://www.amazon.com/dp/B073XR4X72/ref=cm_sw_r_other_apa_i_ntbeEb5FYT62Y

I haven’t had any issues. I wiped the walls with water and microfiber cloths, waited for them to dry, then applied the command strips.

I used the heavy duty ones, and some random hooks I found on Amazon.

Command Picture Hanging Strips Heavy Duty, Large, White, Holds 16 lbs, 14-Pairs https://www.amazon.com/dp/B073XR4X72/ref=cm_sw_r_cp_api_i_OZ4zFbAC55FF7

Wall Hooks 15lb(Max) Transparent Reusable Seamless Adhesive Hooks, Waterproof and Oilproof, Bathroom Kitchen Heavy Duty Wall Hanger-10 Pack https://www.amazon.com/dp/B07DJ2MLYN/ref=cm_sw_r_cp_api_i_F04zFbDGN3D1G

Command Picture Hanging Strips, Heavy Duty, Large, White, Holds 16 lbs, 14 Pairs https://www.amazon.com/dp/B073XR4X72/ref=cm_sw_r_cp_api_i_3h1fFb978XAGS

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72

I've used command strips on all of my displates (12 large) and they have worked wonders! I've moved a few times and haven't had any paint damage so far, but if the paint isn't too good of quality you may see some issues.

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=mp_s_a_1_3?dchild=1&keywords=command+strips&qid=1599427716&sr=8-3

There are heavy duty command strips that are awesome. I have them all over my apt and can confirm they hold up and do remove easily

Command Picture Hanging Strips Heavy Duty, Large, White, Holds 16 lbs, 14-Pairs https://www.amazon.com/dp/B073XR4X72/ref=cm_sw_r_cp_api_fab_rPQHFb61509Q9

Command Picture Hanging Strips, Decorate Damage-Free, 14 pairs (28 strips), Indoor Use, White (PH206-14NA) https://www.amazon.com/dp/B073XR4X72/ref=cm_sw_r_cp_api_i_B.lsEbRH0YAR9 ive got these?

Would you mind answering a question?

> I use Velcro, picture hanging command strips. One side on the back of the pad and the other on the ceiling.

I have just bought these aswell. Did you remove the protective layer on the back of the hook pad before attaching the command strip to it? I am unsure if I should let the protective layer on the hook pad stay on. If I let it stay on it might loosen from the cable tugging. If I remove it first and attach the command strip right to the adhesive surface of the hook pad, then there are two different kinds of adhesives against each other which might not be a stable solution either. What did you do?

These are what I use

Command PH206-14NA Heavy Duty,... https://www.amazon.com/dp/B073XR4X72?ref=ppx_pop_mob_ap_share

Something like this.

these

Amazon These work great and don’t harm the poster when taking them off, if you put them on correctly. They have smaller ones, the ones I used were overkill. Mounting putty also works well.

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=sr_1_3?dchild=1&keywords=picture+strips&qid=1604294676&sr=8-3

We use two-per frame, because if you hang from just the top edge (which is totally possible), they tend to "hang" from that and aren't flush to the wall. Thus, they appear to be a bit off/distorted, depending on the glass/plastic in the picture frame.

Buy these they work flawlessly. No need to spend money on a mount. You can just stick one to the roku and stick it to the back of the tv

I used https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=sr_1_5?crid=2XQ0MPECRB3J5&dchild=1&keywords=command+strips&qid=1592175889&sprefix=co%2Caps%2C157&sr=8-5

Picture hanging strips. It's like a strong Velcro. Just get the bigger ones.

https://www.amazon.com/dp/B073XR4X72/ref=cm_sw_r_apa_i_D5bBEbP8D82K1

You'll have to hang lighter frames tho or use a lot of strips along the whole frame. You can for sure use them with canvas wall art. Those are very light and don't need a frame.

For anyone who is interested in how this was achieved

Frame from Fanatics (all teams available) - can be purchased for $125+shipping if you catch a sale

Command Large Heavy Duty Picture Hanging Strips - I didn’t want to anchor the frame to my wall like Fanatics suggested so I went overboard and used 10 pairs, 4 along the left and right edges and then 2 in the middle

Small frames are from Michael’s, no link for those but they can be purchased for $10 or less depending on sales

Command Universal Frame Hangers - used these to hang the smaller frames. How you hang them depends on what type of frame you buy, but if you get the ones I did from Michael’s, I think these hooks are the best option

Command Strips do a good job. They can hold quite a bit of weight and come off clean.

Blu Tack is also very flexible and can be reused, but can’t hold as much weight.

I know there are some specific that you can get. If you look through the treads or search it you can find it listed.

Me, I forgot all about needing tape when I went to change my screen. Got to the section on the video about tape and about panicked.

So I searched around the house and found a few of those 3M wall mounting strips. Cut it to size and it worked perfectly.

Command PH206-14NA Heavy Duty, Holds 16 lbs Picture Hanging Strips, 14 Pairs, White, 14 Pack https://www.amazon.com/dp/B073XR4X72/ref=cm_sw_r_cp_api_i_fsM6EbDTQ7B4P

https://m.youtube.com/watch?v=TwIHzmYJwQw

That is the video that I used to walk through it. He recommends a few specific tape brands in the comments.

Command adhesive white velcro strips. Fuzzy side on the ceiling. Easy to take down and reattach, or remove completely if need be.

When i used retracts they were velcro'ed to the side, not even hanging down without any issues.

​

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=sr_1_3?dchild=1&keywords=command+velcro+strips&qid=1607705302&sr=8-3

You could try this. Or something like these.

So you would clamp the lighthouses to the poles?

Would these work better and be cheaper? https://www.amazon.com/Skywin-Compatible-Station-Sensors-Constellation-PC/dp/B07B6FDKZ8/ref=zg_bs_14670123011_13?_encoding=UTF8&psc=1&refRID=CDBEQW8QCH4T2ZW2SW9Z

Or you could use some of these Command Strips to mount the Lighthouses to the walls if you live in an apartment. https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=sr_1_2?dchild=1&keywords=command+strip&qid=1597717402&sr=8-2

I don't know your play area so I'm just throwing out ideas.

Each pair of strips is rated for 4lbs (on a vertical surface). The OWM3s have enough space for 5 pairs of strips, so I did that. I feel pretty confident that they'll be fine, even during an earthquake.

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=sr_1_4?keywords=command+strips+large&qid=1582589305&sr=8-4&x=0&y=0

Would something like this work? Also, how many would I need?

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72

Use these to hang the strips. Strong, safe and temporary if need be.

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=sr_1_3?crid=2P16SD7K7X99O&dchild=1&keywords=3m+picture+hanging+strips&qid=1596159439&sprefix=3m+pict%2Caps%2C542&sr=8-3

Look at my studio. I got poster board, cut 3" squares, glued the squares on the corners of the back of the foam, then attached double sided 3M command strips, like this. But don't buy them on Amazon because when I did, I was sent "new" strips that must have been a decade old or knockoffs because after peeling off the back, the strips couldn't hold their own weight on the wall when attached to nothing at all. They just fell off the wall, the adhesive sucked. Luckily my dad's business has a wholesale account with 3M, so we ordered some directly & then they worked perfectly.

A few of these should work without breaking the bank

​

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72/ref=sr_1_5?crid=209RLCOENT0JX&dchild=1&keywords=heavy+duty+command+strips&qid=1603240732&sprefix=heavy+duty+%2Caps%2C933&sr=8-5

I have bad news and good news.

Bad news: plants run on photons, and a dark indoors really really limits your options.

Good news: super easy to get "bright" light bulbs that supply the photons plants crave. Then you can grow so many more plants, especially flowering ones like orchids (my recommendation).

What kind of lightbulbs? you may ask. Are grow lights expensive?? Nope, not expensive. I got my regular screw in bulbs at the grocery store, just pick ones that say "daylight" and have the highest Watts number.

Check out the comparison between "daylight" and "warm" lightbulbs: https://imgur.com/gallery/Y96iamK

I also got these on Amazon, they're so light weight I used command Velcro strips to attach them to the ceiling. They're on an outlet timer so I don't even have to touch them. Allowed me to keep plants happy during winter darkness.

Thank you! I used the command heavy duty for the bigger pictures/canvas. I used command sawtooth for the smaller pictures! All my frames are from the brand MCS. I just type MCS and then the size I'm looking for into Amazon

I got them on Amazon: https://www.amazon.com/gp/product/B07QMVKKM7/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

You have the option of drilling them into the walls with the screws and anchors provided but I used these Command strips instead: https://www.amazon.com/gp/product/B073XR4X72/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

It’s actually backdrops I found on amazon. I used a steamer to flatten them and then just command hooks that are double side at the tops, middles, and bottoms. Everything from the walls to the lamps were from amazon. I’ll link below and update when the new table comes in.

Main

https://www.amazon.com/LFEEY-Medieval-Fairytale-Photography-Background/dp/B07F9Q4ZML

Sides

https://www.amazon.com/LFEEY-Fairytale-Photography-Background-Portraits/dp/B07F9XMW87

Command strips large 3 sets

https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72

Steamer to take out the folds

https://www.amazon.com/Conair-Extreme-Handheld-Steamer-Champagne/dp/B07V91437Y

Lanterns

https://www.amazon.com/MammyGol-Vintage-Decorative-Lanterns-Timer/dp/B07TTZBSF3

Chains

https://www.amazon.com/Prextex-Halloween-Plastic-Shackles-Accessory/dp/B07Q46PKRG

Finally I used a sharpie and some scissors to make the proper trimming that needed to be done.

1. Buy refurbished Amazon Fire for $40 https://www.amazon.com/dp/B07KZ9PKWB
2. Buy some Command Strips https://www.amazon.com/Command-Picture-Decorate-Damage-Free-PH206-14NA/dp/B073XR4X72
3. Attach tablet to wall and open the webpage

I do something similar with another tablet I got off amazon, I use it for keep score of darts https://imgur.com/a/cb86ZEG