Bafx Products Wireless Bluetooth Obd2 Scanner Diagnostic Code Reader & Scan Tool for Android Devices Only - Scan, Reset & Clear Car Check Engine Light

I have two of these, one in each of my vw's https://www.amazon.com/dp/B005NLQAHS/

I have this one:

https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_other_apa_i_r-ogEbGPRZA7Z

It works fine, but I would recommend something shorter. The location of the OBD2 makes the adapter sit a little closer to my leg than I'd like when operating the clutch. I'm always paranoid I'm going to kick it and break something.

OBDII port under your dash.

If the check engine light is on the vehicle will have stored trouble codes. They will read them for free at AutoZone or Advance auto. Or you can buy a cheap bluetooth one for your phone like this:

https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS

I have used this one for several years on my 2001 4runner and Tacoma. Requires an android phone and (free) Torque Light app

https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_cp_apa_i_jQBMFbKHJWV5G?_encoding=UTF8&psc=1

Torque Pro is $5 for a lifetime subscription, or was a couple years ago. It can log trips, but you'd have to manually delete non work trips I guess. Reader I bought five years ago that has worked fine, still works fine today, supports most cars.

Can't recommend these enough, we got this one

If you don't want to pay for a good mechanic, then buy this and just do it yourself. And don't forget to buy the sensors, ramps, wheel blocks, tools, Haynes manual, and anything else you'll need to do the job.

I own the exact same year, make and model and I get 18-23 city depending on how hard I'm pushing it. It's been that way for almost 100k mi now, so something is definitely wrong in your case.

Keep up with maintenance - spark plugs & wires, air & oil filters, etc. Also make sure your tires are filled to the correct air pressure as that can add to rolling resistance. The edges of your brake pads could be not lubricated correctly and dragging across the rotors.

This code reader works with Android devices only - I use iPhone but have an old tablet for this purpose. It reads any faults your car's computer has logged and gives you real time info as well. It has saved me a few hours of diagnostics I would have had to pay a mechanic to estimate. Just Google the codes that are logged and look at YouTube on how to fix it. It's usually pretty easy to fix.

Get a bluetooth OBDII reader and the Torque app. You can look at a lot of neat stuff while the engine is running.

https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS/

Might also help inform why the idle is fluctuating. Everything u/maskeddummy has said is gold and I cannot upvote enough times.

Yes, lite is not actually lite though, it's fully interactive. The Windows version is free if you have a laptop.

I don't know if this link will work, but it's the BAFX Bluetooth dongle on Amazon

afx Products - Wireless Bluetooth OBD2 / OBDII Diagnostic Car Scanner & Reader Tool for Android Devices - Read/Clear Your Check Engine Light & Much More https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_em_apa_i_iu.UEbRBG3PX8

Excellent thank you. Is any of this possible with a standard obdii reader, like this one? https://www.amazon.com/dp/B005NLQAHS At least just reading the codes?

https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_other_apa_i_8wZnEbGBNM3H6

This look good? I saw some website saying some chinese made ones aren't being recognized on leafspy?

ahhh that sucks major. I am sorry for your current conditions! if you have 20 dollars lying around (who does lol) you can get a bluetooth OBD reader that'll tell you what the check engine light is for and allow you to clear it. sometimes it's something stupid like the gas cap not being tightened enough, or sometimes it's just an anomaly and after you clear the codes it never comes back. super easy to use and can save some stress. you just plug it in under the steering wheel and use an app. feel free to PM me if u want.

https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS/ref=mp_s_a_1_3?dchild=1&keywords=obd2+bluetooth&qid=1593333084&sr=8-3

I'm not super car savvy but I use one of these to see what is going on with my car, it tells my why the check engine light is on through an app.

Autozone will use their scanner to give you a free diagnostic too. It's worth it for the peace of mind, always felt like my mechanic was screwing me, turns out he was and I found a place I trusted.

I bought the Bafx Products one on Amazon, it's a bit on the pricer side at 22 Dollars but the reviews stood out to me and it was an Amazon choice product so it was kind of a no brainier purchase to me. It's been a great purchase and I've had no problems with it, would highly recommend.

https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_other_apa_i_ids0Eb3E077PQ

Just bought this one from amazon. I bought it just in case something comes up and for 20 bucks it's a nice thing to keep in hand. Lots of reviews, bluetooth, and a free app all back it, but make sure this is something you're looking for.

https://www.amazon.com/dp/B005NLQAHS?ref=ppx_pop_mob_ap_share

Get yourself a cheap Bluetooth OBD II scanner like this and download Torque Pro on your phone to read your engine codes, that'll help point you in the right direction.

Better to have a starting point instead of throwing parts at an issue when you don't know the true cause, it'll save money and frustration in the long run.

Not for 20$ they won't...

https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_cp_apa_fab_9L2FFbXQ0CPH1

Grab yourself one of these. At a minimum you’ll be able to read the history of thrown codes and when they were cleared last. With some minor mechanical knowledge it has other benefits as well.

BAFX OBDII Scanner

https://www.amazon.com/gp/product/B005NLQAHS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 with Torque Pro works great on Android.

I purchased an OBD sensor from Amazon and it works great for this. I have not used the function to replace fuel maps BUT I know it is on the TuneECU app as well as available maps (not all exhausts will have a map to load though so maybe look for one first).

I have used mine to check error codes, run tests on my radiator fan, and adjust throttle bottles on my 2013 Street Triple R so I know yours will work too. Just make sure you have an Android device as ours does not work with the Windows version.

Here is a link to the one I purchased along with the $10 TuneECU app on the Google Play store: https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_other_apa_i_byzzEbPJXSACF

Yes, you want the BFX one on Amazon for ~$24 IIRC on the price, but it's definitely that one. Use it myself, works like a charm. Gotta start the bike and use the killswitch to stop the motor, but leaving the electronics on, and then you can do the things. Reset the service interval reminder, flush the ABS, etc. For things the bike's running for like throttle body balancing, easy enough to do too.

Edit: This is it: https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS

https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_cp_apa_fabc_n3MZFbFMP2DXY (only works with Android)

Also, give him $5 Google play gift card to buy the app he'll use (Torque Pro)(make sure he actually buys the Pro version)

https://www.amazon.com/dp/B005NLQAHS?ref=ppx_pop_mob_ap_share odbII with the torque app in google play

Could you provide me with a link to these devices I just bought this and its not giving me the information I want ODB2

Well if you DO want a fancy OBD2 scanner now, I recommend this one (they make an iPhone version too) https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS

$23 and works with various OBD apps on your phone. Great for peace of mind knowing when the light came on that it was just something minor like an oxygen sensor rather than something that requires immediate attention.

Bafx Products - Wireless Bluetooth OBD2 / OBDII Diagnostic Car Scanner & Reader Tool for Android Devices - Read/Clear Your Check Engine Light & Much More https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_cp_api_i_cPrqFbZ7WC8TE

I would purchase this ASAP for diagnostics. Amazon Prime will get it to you sameday or latest next day

https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS

Thoroughly read the manual. Believe me, it will teach you a lot.

Follow make and model on YouTube. Not everyone on YouTube is right but even knowing how the parts look and what do they do for the structure and function of the car will make you at ease when it will be a time to address anything.

Buy a good OBD reader, This OBD reader is the best bang for the buck and tinker around with the app, learn how to read CEL codes.

Learn how to change oil and air filters, to begin with. Consider investing in an oil drain valve (I have EZ oil drain vale on both of my cars). Some are not comfortable with this valve but I was just like you a few years ago but this makes life so easy. Plus, an oil change is so cheap but you pay through nose at the mechanic. Best oil on the market costs less than $30/5qt (not talking about Amsoil and stuff), Filter costs about $10, but if you choose these options at the dealer or mechanics, be assured, you will pay almost $100. Add that twice a year over the life of a car.

If there is a service manual available for your car, buy it. Its overwhelming at first, but even knowing what could be wrong can protect you from fleecing mechanics. Not all mechanics take a customer to the laundry but finding an honest one is a tough job. In such a case, knowing things helps. When you find an honest mechanic, stick to them. I found one after almost 10 years of mechanic shopping and now I don't mind paying extra.

Enjoy your ride.

I've got this one. You'll also need an app. I use Torque Pro

Yup, that's definitely the worn distributor gear. Having a scan tool that gives you cam retard in degrees will let you set timing. Sometimes you can adjust to compensate for the wear, but it usually needs a new dist. You get the code for cam correlation because the cam sensor is under the dist.

It's worth noting that a worn timing chain can also affect this timing. The stretch combined with the play in the worn gear makes the degrees worse. If you find the cam retard bounces around a little bit after the distributor replacement, that would be the next place to look.

To measure cam retard, I use a decent cheap bluetooth OBD2 reader with an app like dash command or torque pro. Gives you a lot more information at minimal cost.

I have this reader https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_cp_apa_i_F7clFb5VRDAS1 without a switch. It works on forscan, but only get this one If your computer has bluetooth

https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_cp_apa_i_4LfhFbRSENXFS

https://play.google.com/store/apps/details?id=com.ovz.carscanner

Is what I use. I don't keep it plugged in because it disconnected my home wifi if I have my car on but it worked for what I needed.

I use this one combined with an app like Torque which will allow you to read and clear codes and even check whether your emissions are ready and passing before heading to the test station.

I'd recommend the ELM327 based dongles instead. It's an open standard and has a lot of free and paid apps available for it, cheaper too. The only downside it they don't work with Apple products. https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS/ref=sr_1_11?dchild=1&keywords=elm327&qid=1594432715&s=automotive&sr=1-11

Just get an OBDII reader with Bluetooth and use a phone app to display additional Gauges. I have one of these: https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS . Mine also sends data via BT to my Garmin camera so I can overlay real-time data on videos.

Only works with Android but they have a model that supports IOS (iPhone etc). Lots of other choices too.

Definitely allowed by rule 13.2 B:

No problem. Good luck my dude.

I believe this OBD2 scanner might be good, not sure, never used it, pretty cheap, TONS of reviews. I've got a $60 one I keep in my car along with jumper cables and a tire pump I picked up at harbor freight. Highly recommend you get that stuff or an equivalent. It all fits on top of my spare under the trunk floor. You might have less space in a Jetta though. Just helps not getting stranded or relying on someone to save you.

Definitely bring someone with you to check out any used cars. If someone you know knows about car repair, even better. If not, they can still help in a lot of ways. One big one is to have them distract the seller so you can inspect the car without being interrupted or distracted. If you have to, ask the seller to be quiet so you can inspect the car and that you'll ask questions if necessary.

Before you go look at a car, search for info on that car on the internet. How do you check the oil, transmission fluid, brake fluid and coolant? What are the typical issues that this particular year, make and model run into? Are there any safety recalls? Where is the OBD2 port (if you bought a scanner)?

Make sure you bring a notepad, a pen or pencil, a rag and a flashlight. Take lots of notes so you don't have to remember anything later. If you can, buy an OBD2 scanner like this one for iPhones or this one for Android phones (keep in mind that these products also need you to get an app on your phone which may or may not be free).

When you get there, make sure the car is off and cool. You don't want to find that they've already started it up or had it running to cover up any items you may miss on a cold start.

Don't start it right away. Inspect the body and interior. Check the fluids (you did look up how for this particular car, right?). Use the flashlight to look under the car and around the engine bay to see if there is oil or any other fluids on anything.

Hook up the OBD2 scanner and follow instructions on how to read codes. You may need to lay on the driver's side floor to find the port.

Get in the car and start it up. Make sure you watch the lights on the dashboard. They should light up and then go off. Listen for any weird sounds when you start it up. If you can, record them with your phone or something. Take the car on a test drive, again if the seller comes with you, make sure they are quiet. You want to focus on the car.

If everything is looking good, see if they'll let you take the car to a mechanic to have them put it on a lift and go over it. Ask on Facebook if you don't know any mechanics. Review your notes with them to see if anything stands out. They may also be able to give you tips on what you should be focusing on.

Anyway, good luck, kid.

The best one on the market is the bluedriver but if you're on a budget of recommend a bafx , my buddy has one and he likes it a lot.

The $20-30 Bluetooth OBD scanners have a tendency to shit the bed on a semi regular basis. General rule for auto tools is if you've used the shitty knock off version until it breaks, then it's time to pony up for the better/name brand version. Your best bet is to pick one off of here: https://www.cnet.com/roadshow/news/best-obd2-scanners-of-2020/

With that said, I've had this one for ~4 years now and haven't had any issues connecting to my Subarus or Kia, and it is much cheaper than the other options. https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS/ref=mp_s_a_1_11?dchild=1&keywords=ELM327&qid=1607055772&sr=8-11

Good luck!

https://www.amazon.com/gp/product/B005NLQAHS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 never had any issues with it, seems to work well enough for both torque and Dr prius on my 2012 prius, 2013 ford, 2017 prius, and 2019 ford

>f the light stays off then it’s safe to assume the bag is working fine.

Thank you! I have a OBD2 reader but unable to read this code. Should I get any other scanner? This is the one I have : https://www.amazon.com/BAFX-Products-Wireless-Bluetooth-Diagnostic/dp/B005NLQAHS/ref=sr_1_1_sspa?dchild=1&keywords=obd2+scanner+torque+bluetooth&qid=1590556134&s=automotive&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyOVZRWlJaUEVBOVRUJmVuY3J5cHRlZElkPUEwMTA2MzIzMVhKN0UyWTI1U0RSQyZlbmNyeXB0ZWRBZElkPUEwMTM5MTY3M0RQUzVNN0hZSDE5TCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

After reading your other comments, if you're having front end wobble at highway speeds, you should have your tire balance checked

FYI, you have the same car I do. I'd either purchase an OBD2 reader or take it to a parts store to get the codes scanned to see what is triggering the check engine light (CEL). If the car is running fine, its probably nothing serious.

Its a decent car to learn how to work on, because there are going to be simple things go bad on it that aren't too difficult to replace.

Best of luck!

(NOTE: My links and prices are for the US side of Spamazon - search for the same on the UK side.)

If you're going to buy a cheap one, the Bafx Products one is solid. It's arguably the best sub-$50 scanning device available right now and I've used it on hundreds of vehicles without a problem.

If you're wanting something faster and more powerful, the OBDLink LX is solid. I'd also suggest this one over the Bafx one if running telemetry to a tablet, etc. as it has a much faster refresh rate.

Beyond that, it's definitely time to go with a handheld versus dongle, and you can get professional ones for a couple hundred bucks.

Avoid the sub-$20 dongles, as they're usually using a stolen copy of firmware from an older version of the ELM327 ODB bridge, which will be buggy and failure-prone and doesn't support features the current real ELM327s do. (The Bafx dongle I mentioned above is a real ELM327.)

I’ve gotten one of these after searching up online that having one of these will help you diagnose the problem. However, I am unsure if this can communicate with the transmission control module.

After some further research, it seems like these can do what the dealership can do. Should I return the first and buy this?

I was using one of these with Torque Pro app, but it wouldn't work with Bimmercode so I picked up this slightly more expensive Veepeak

This + the Torque app on your phone ($5) = perfection

If it's just a reader, this has never let me down. I've owned it for years. Looks like they've updated it since then too.

https://www.amazon.com/gp/product/B005NLQAHS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Well most of the time I use the shops Snap-on Zeus. Obviously being so expensive it works pretty reliably. But, for the rest of us Joe-Schmoes (me outside of work included) I actually use a very handy little Autel AL619 Scanner and it works great! Goes for about $100 normally but I picked it up for $85 on sale. Does ABS, SRS, ECU, and some TCMs. Codes, live data graphing, and service resets. It does not have bi-directional control or access to body modules from my experience, but works well. My only complaint I have with it is that the OBDII cord seems unnecessarily thick but eh. Not really a problem, just weird. Screen is backlit too which is pretty useful.

If you want something even cheaper, get a reliable bluetooth OBDII dongle (I have not had issues with this specific one, but other bluetooth dongles I have) and the Torque Pro app (honestly the $7 or whatever for the Pro version is totally worth it) and that does good live data graphing, code scans (sometimes it'll even pull BCM codes!), and SOME service resets as well!

The recall just updates the software to warn you earlier when the propulsion battery starts to go bad. It warns you first (now even earlier than it would have before), then eventually the computer decides the battery can longer safely propel the car & switches to some kind of engine-only reduced propulsion mode, allowing you to limp home/to the dealership. If the battery is already going bad after only 50k miles, that should be covered under the voltec warranty (assuming you have that awesome CA warranty).

If you don't wanna take it to the stealership, maybe get a bluetooth OBD scanner? I think they can fetch battery health reports(?), or even just let you look at old codes that might help shine light on the situation. That one's $60, but supposedly even the <$25 models can help.

Or you could visit your local auto parts store (autozone, pepboys, o'reilly, napa, etc.) - usually they'll read OBD codes for free & try to interpret them. I don't have one myself, so that's what I've always done.