Audio-Technica AT-LP120XUSB-BK Direct-Drive Turntable (Analog & USB), Fully Manual, Hi-Fi, 3 Speed, Convert Vinyl to Digital, Anti-Skate and Variable Pitch Control Black

I bought it from Amazon but I think the price should be roughly the same everywhere.

Audio-Technica AT-LP120XUSB-BK Direct-Drive Turntable (Analog & USB), Fully Manual, Hi-Fi, 3 Speed, Convert Vinyl to Digital, Anti-Skate and Variable Pitch Control

https://www.amazon.com/dp/B07N3S4X3P/ref=cm_sw_r_cp_tai_hdUAEb57NTPPB

Yeah I’m in the same boat xD now that I have a small collection of tipper, shpongle, Jade & 1985 vinyl i should prolly listen to them lol

here’s the one I’m looking at (not ordering from amazon tho)

Audio-Technica LP120XUSB I highly recommend it. Thank you! It's simple, but I was gifted the turntable stand so was finally able to set something up.

Hello,

Looking to buy my first record player and looking at the AT LP120XUSB-BK which seems to be the updated version of this record player. It's on this sub reddits beginner list.

Curious....

1. Is this still a good choice?

2. It says it has a built in preamp so I'd be able to plug directly into any speakers with RCA input, correct?

3. Any speaker recs? Not looking to spend a ton. Maybe $1-200.

Thanks ahead of time. I'm sure it's not the first you've answered this question.

You havent noticed, but i did and so did my non audiophile gf. Toss a preamp on it and play it at louder levels, the fuzz and distortion increases every time you play the same record because its being slightly damaged. If you have more that a few vinyls and care about your investment spend a few more dollars on at least the https://www.amazon.com/Audio-Technica-AT-LP120XUSB-Direct-Drive-Hi-Fidelity-Anti-Skate/dp/B07N3S4X3P/ref=asc_df_B07N3S4X3P

Or a low level fluance. Its actually worth changing the heads on eiher of those

> Budget id be willing to drop anywhere up to 300-400 USD max.

The Audio-Technica AT-LP120XUSB-SV is the most basic turntable you could look at. It's clearly in your budget, and you could use the extra money for a nice cartridge.

https://www.amazon.com/Audio-Technica-AT-LP120XUSB-SV-Direct-Drive-Turntable-Anti-Skate/dp/B07N3S4X3P/ref=dp_ob_title_ce?th=1

If you're not familiar with turntables, the AT-LP120 is based on the legendary Technics SL1200, which was the DJ standard in turntables for decades until they stopped production.

U-Turn Audio has some very affordable players as well, but they are just for playback and are not for DJing.

You might also see if you can pick up a used SL1200. It might be a fixer-upper, but parts are easy to get and you will have a tank of a turntable that will last you for many, many years.

I rock a Project Debut Esprit Pro-Ject - Debut Carbon Esprit SB (Black) https://www.amazon.com/dp/B00AWB6C22/ref=cm_sw_r_cp_api_fab_mC1HFb0SSQ26B

But there are plenty of great vintage options out there. The Audio Technical LP120 is very popular as a step up from the $100 turntables out there.

Audio-Technica AT-LP120XUSB-BK Direct-Drive Turntable (Analog & USB), Fully Manual, Hi-Fi, 3 Speed, Convert Vinyl to Digital, Anti-Skate and Variable Pitch Control https://www.amazon.com/dp/B07N3S4X3P/ref=cm_sw_r_cp_api_fab_pE1HFb2ABMKSS

Hello, I'm finally ready to jump onto the journey of collecting vinyl (well, I have quite of lot of them). One of my friends had given me a vinyl from Amazon, but of course, I want to upgrade.

I'm looking at the Audio-Technica AT-LP120XUSB-BK. It seems like a good entry-level turntable for the price. Thoughts?

Considering I'm getting that turntable, which speakers would be recommended under $300?

Thank you! :)

I'm a fan of direct drive turntables, if I were to buy one today I'd get a AT-LP120USB

Thanks for the tip! Is this what you were suggesting? https://www.amazon.com/dp/B07N3S4X3P/ref=cm_sw_r_cp_api_i_3vhaFb1EBKE1X

Is the 2m Blue cartridge an upgraded cartridge? Is the cartridge that comes with it fine?

I'm surprised you are having issues with the LP60X already since it is said to track better than the older version LP60 and is does not seem to be as prone to skipping. You are sure you have the new X version and not the old version?

The AT-LP120X is a better turntable all around than the LP60X so don't let the automatic 60 turn you off of AT if you like the manual 120. It has adjustable tracking force and adjustable anti-skate.

The U-turn lacks adjustable anti-skate, it's preset at the factory, it's another $40 for the cue lever and another $35 for the elliptical stylus OM5 upgrade from the base conical, plus $20 shipping. However you can add the cue lever and stylus upgrade later, but never add adjustable anti-skate.

The RT82 has adjustable anti-skate, includes a cue lever and includes the OM10 stylus which is just as good if not a bit better than the newer version 2M Red.

The Debut costs $125 more than the RT82 and does not seem to be any better. Some don't like the hanging weight anti-skate on the Debut.

I looked at U-turn, LP120, Debut and went with the RT82 which seemed like the best value for the features and it sounds and works great for me.

I agree with homie

this one if it’s like non negotiable Under 100

https://www.amazon.com/Audio-Technica-AT-LP60-Automatic-Belt-Drive-Turntable/dp/B002GYTPAE

If you want a real turntable this one is like the standard one in the post digital industry

https://www.amazon.com/Audio-Technica-AT-LP120XUSB-Direct-Drive-Hi-Fidelity-Anti-Skate/dp/B07N3S4X3P/ref=mp_s_a_1_3?keywords=audio+technica+turntable&qid=1585255361&sprefix=audio+tec&sr=8-3

There is this 🙌

https://www.amazon.com/dp/B07N3S4X3P/ref=cm_sw_r_cp_apa_fabc_4.CTFbDS4D95J

Is this a good record player?

record player I'm looking at.

I have powered Mackie MR8 speakers. What cables would I need to hook this up? Any help is greatly appreciated. This is my long awaited upgrade from my $99 audio techinica turntable. Any help is greatly appreciated.

Audio-Technica AT-LP120XUSB-BK Direct-Drive Turntable (Analog & USB), Fully Manual, Hi-Fi, 3 Speed, Convert Vinyl to Digital, Anti-Skate and Variable Pitch Control https://www.amazon.com/dp/B07N3S4X3P/ref=cm_sw_r_cp_api_i_fdsLEb1HKTARS

But try to find it used (locally) ; you can save tons

I don’t know much about the Fluance but I have the AT-LP120 which i really like. It’s the same price as the fluance and might be worth a look.

https://www.amazon.com/gp/aw/d/B07N3S4X3P/ref=psdcmw_3003611_t1_B07PZF7S8G?utm_source=share&utm_medium=ios_app&utm_name=iossmf

I have twin Technics SL-1200MK5's. I would recommend the MK7's but those are like $1000 a deck. The audiotechnica clones aren't bad for a budget.

[Audio-Technica AT-LP120XUSB Direct-Drive Turntable] (https://www.amazon.com/Audio-Technica-AT-LP120XUSB-Direct-Drive-Hi-Fidelity-Anti-Skate/dp/B07N3S4X3P/ref=sr_1_1?keywords=Audio-Technica&qid=1581807699&sr=8-1)

Thanks! It works fine for me, however I have heard that the lack of adjustable weight on the needle can damage your vinyl. I'm pretty new to vinyl (all mine came second hand from my dad) so I don't know how much credence to lend that. If you're worried about it, I would upgrade to the AT-LP120, but for almost double the price it's not in my meager college student budget.

I’m not an audiophile, and the current turntable I have is bad for records. It’s one of those detrola record players/cd players/radio/tape deck. I’ll link the record the player I’ve been looking at. If you have any suggestions for speakers, I would love to hear it.

https://www.amazon.com/Audio-Technica-AT-LP120XUSB-Direct-Drive-Hi-Fidelity-Anti-Skate/dp/B07N3S4X3P/ref=gp_aw_ybh_a_7?_encoding=UTF8&psc=1&refRID=7RMXE8RD1SCPEF970Y5N

Yeah unfortunately Crosley's are seen as more of a gimmick or toy than what would be considered a "real" record player. It's two biggest issues are the arm and weight. The arm applies too much force on the records and that's going to carve into the vinyl. Record players should have a counter weight on one end of the arm so you can adjust that force appropriately. And because they're so light they're more prone to vibration which hurts audio quality as well. People in the vinyl community don't recommend anything cheaper than a $250 turntable. Like OC said no judgement, but I personally wouldn't put any records that are valuable to me on a Crosley. I got one for Christmas one year and after reading reviews I returned it the very next day. Broke my sister's heart but at least my Blonde vinyl is intact lol.

Are there any opinions about the Audio Technica LP120 with USB? Also, what is the target light for... what is 'cueing'?

Hey guys I'm a noob and I have a simple question that's bugging me. I'm so glad to find this thread; seems like people here are generally willing to help a friend out.

 

My question boils down to a turntable recommendation. I have my eye on the U-Turn Audio - Orbit Special Turntable with Built-in preamp (Walnut) from Amazon, retails for $549.

I'm comparing it to the Audio-Technica AT-LP120XUSB which retails for $229

 

I basically just want a good player which won't destroy my records. The first one looks incredibly simple. It doesn't even seem to have a volume control on it (I'm not sure if these are even supposed to). Why is it so much more expensive? Is there anything better about it?

The second one seems complicated with a lot of features I may or may not even care about. Would it be difficult to use and/or set up, and would it be good enough?

Any advice would be greatly appreciated. If you have other recommendations my budget would be [<$700] (not including speakers)

Hey I’m just getting into vinyl and after reading a lot of threads on this I’m so confused. I got a suitcase style record player for Christmas but I want something that is going to sound good. My budget for the turn table would ideally be $250 but would go up to $300 if the $50 would make a considerable difference. Right now I’m looking at buying new but would be open to used gear if that’s the better route for my budget. I live in Indianapolis and my zip code is 46203.

Right now I’m thinking if either getting: Audio Technica AT-LP120 OR Fluance RT81

As far as speakers and receivers go I don’t even know where to begin. I don’t really have preference on new or used. My budget would be $100-$150. I’m a college student so I know my budget is low but I really just need an upgrade from my suitcase turntable. Ideally for my entire setup I’d like to be around $400. I’d appreciate any input or suggestions! Thank you :)

This is the set up I see most in the sub. It gets good reviews. It's $100 more than your budget, but I can guarantee your music will sound much better and your records will be safer with this than with what you originally got and what you linked.

https://www.amazon.com/dp/B07N3S4X3P/ref=cm_sw_r_cp_apa_i_6KDqFbXGQC0NJ

https://www.amazon.com/dp/B016P9HJIA/ref=cm_sw_r_cp_apa_i_8JDqFbDGE6CG2

So I just got the Audio Technica AT-LP120X turntable and Edifier R1280T powered speakers, based on recommendations I found on here. However, my records are pretty quiet when I play them. It's not whisper quiet or anything, but max volume on the speakers is just barely a comfortable listening level. The turntable is supposed to have a built in pre-amp, so that shouldn't be it, unless there's something I have to do to turn it on. Any recommendations on what I can do?

I have a heavy suspicion it's the needle, tone arm, etc. that's causing this rather than a mispress occuring on so much new music.

Considering you're entirely forthcoming by saying "my player sucks" because trust me some people come in here fighting tooth and nail for their crosleys, I would almost guarantee if you would save for a simple audio technica or spend a small amount extra and get a nice standard direct drive table that would probably last the rest of your life, you'd solve this issue and basically re-experience your entire collection over again with the sound difference.

Nice, although a piece of advice: if you actually care about your records, toss the Victoria. At the cheap end, get a AT-LP-60, and if you can afford to spend a tad bit more, a AT-LP-120. The Victoria will scratch, warp and damage your records, as well as the fact is sounds horrible. If its there for show, then okay, it looks nice, but otherwise, consider upgrading.

Every time I see these posts, I try to find a better way to say this: please invest in a better record player. Your vinyls deserve it. Those Crosley brief cases destroy records over time. Specifically, it’s the arm and the weight on the inferior stylus.

I personally prefer the U-turn orbit but that’s a little expensive for beginners. The AT-LP120XUSB is a popular entry level one too.

It’s not an audiophile thing, it’s a long term investment in your records.

Source: Someone that ruined an original print of Pinkerton on a Crosley. I was given the same advice and thought the person was a judgmental dickhead...followed their advice and never looked back.

Hey all, I am looking for a whole setup and thinking about starting with an Audio Technica LP120X but would love some help on what to get for a receiver and speakers. Found Klipsch KG4.5's on Craiglist here, and have heard good things but would love more opinions. Looking at CL in Jacksonville FL and Williamsburg VA. Thanks

First of all, I'm not a Hi-Fi specialist or some sort.

I've been collecting records for many years until I got my turntable last year. You've two options, going the brand new way or buying a vintage turntable. I really like the fully mechanical DD turntables so I've decided to buy a near mint condition Technics SL1700 MK1(w/ an average cartridge) for 500 USD. Even though that's a 43 year old machine, there's no problem with any mechanisms. Vintage Japanese turntables are really reliable and almost bulletproof. However, you could go for a brand new one as well. They tend to have better sound when paired with same cartridge but they're not as rigid as the vintage ones. AT-120LP is considered to be a good entry price performance model. If you want to spend a little more, you could buy Pro-ject DC with 2M RED cartridge or Rega Planar 2. If you have a strict budget you could get the AT-LP60X but this is bare minimum imo. Amps and speakers are a whole different subject, I will not get into it. My suggestion is if you can, listen to your setup. I've bought mine after listening to it at the shop with my speakers plugged in. Most second hand stores allow you to do that, at least here in Turkey. Unlike CD drives, most turntables didn't age as the time went by. Don't let the age of 2nd hand turntables fool you. A 40 year old Technics sounds just as good as a middle end turntable from this age. But if you decide to buy a 2nd hand device, you should learn the issues about the model, the condition etc.

&#x200B;

TL;DR

Like the looks of vintage, the rigidity and reliability of old tech, buy a 2nd hand. They tend to be always cheaper than brand new turntables and sometimes even sound better. You can look for legendary Technics SL 1xxx series, Technics' 80-90's models. Dual and Thorens are great manufacturers too.

Don't want to hassle with finding a turntable in good condition and good price, want more compact and modern design, buy a brand new one.

This might be your first turntable so start off with medium-low end, and then gradually rise up.

Again, im not a specialist or anything, these are just my opinions.

It’s an Audio Technica LP 120 . I upgraded the needle and cartridge from the AT95E Model (The standard that it comes with) to the Orotofon 2M Blue. I love my setup and it sounds amazing, but it’s pretty pricey when you look at it all at once. All the upgrades I did were over the course of several years.

For people getting into the hobby, I would highly recommend the Audio Technica LP 60 which is a great beginners turntable! Audio Technica makes super high quality products. I’ve had my turntable for three years and it still holds up great. For speakers, get your hands on a pair of powered ones and you’ll be good to go!

[$500} I’m looking to create a vinyl, CD, cassette set up [Atlanta, GA open to buying online, local shops, and maybe Craigslist if there’s equipment there that will really help me!] Hi all!!! I've been a vinyl collector for years and recently joined VMP. Now that I'm a homeowner and recently finished my renovations, I would like to build my setup. I would like to create a set up where I can play my vinyl, CDs, and cassettes (yes I still have cassettes and I have great memories on them)! I'm looking at the Victrola 6-in-1 Wood MidCentury Record Player and the Teac LPR660USBPB LP-Cassette to CD Recorder Home Theater System. But everyone yells and says to NEVER buy an all-in-1 system. So then I found the Audio-Technica AT-LP120XUSB-BK Direct Drive Turntable. It looks really good and I would like to get it. But then what do I do for a cassette and CD player and how will they hook up to the speakers. Speakers are a whole other dilemma because I would like to get bluetooth speakers/ wireless speakers, but then everyone says I’ll dilute the sound turning it from analog to digital. All of this has been very overwhelming. All I want to do is create a great sounding system so I can listen to vinyl, CD, or cassette on any given night to relax. HELP PLEASE!!!

i know im late af but i would recommend the Orbit Custom or the Audio Technica AT-LP120. the orbit custom https://uturnaudio.com/products/orbit-custom can be customized in many ways and has good build quality while the at 120 https://www.amazon.com/dp/B07N3S4X3P/ref=twister_B07PNRXZNG?_encoding=UTF8&psc=1 has additional features like pitch control, but a little worse build quality. your choice

Unfortunately $100 is a hard price point to hit. Here's some generic advice that somewhat disregards your budget. I hope it's helpful anyway.

Avoid: any of the 'suitcase' players. Such as this or this.

Avoid: Anything with built in speakers like this or this.

If I had to spend the least amount possible on a new turntable: Audio-Technica AT-LP60

If I had a little more money: Audio-Technica AT-LP120

Another option is used. It's tricky if you don't have anyone to reach out to, but a lot of older turntables are very high quality. Sometimes record shops refurbish them and keep a few on hand for people starting out.