Alinsea Screen Protector for OnePlus 7 Pro/7T Pro Tempered Glass [Full Adhesive] [Fingerprint Sensor Compatible][3D Glass] Screen Protector for OnePlus 7 Pro/7T Pro

I recommend the Alinsea screen protector also. It is great and reasonably priced. Mine was around 15 in amazon. https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_cp_apa_fabc_6kdYFb5M531TQ

https://www.amazon.com/Alinsea-Protector-Fingerprint-Compatible-Replacement/dp/B07X8FFWK2

Very nice though kind of a pain to install because it has a liquid adhesive you put on instead of the protector just sticking. However, they have a thing where even if you install it wrong, (bubbles under the glass, not positioned right etc) they send you another no problem. Tried it, customer service was very helpful.

This is the one I got, the process to install it is a little weird but it worked out really good and covers everything unlike really cheap ones, only $14

https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_other_apa_i_7xueEb3MWE650

One plus 7 Pro Alinsea screen case?

Has anyone used the Alinsea screen case. Is the cutouts good? Does the finger print scanner work? Does it offer actual protection? How does it feel?

​

this is it for those wondering https://www.amazon.com/Alinsea-Protector-Fingerprint-Compatible-Replacement/dp/B07X8FFWK2

Alinsea Screen Protector for... https://www.amazon.com/dp/B07X8FFWK2?ref=ppx_pop_mob_ap_share

There are several posts about this on this subreddit. They mention that this one is a very good one. I have it installed. I've had no problems with it and still got the second one ready to go if the first one would would break at some point. The installation is pretty hard. There's no alignment frame and it could be messy with the liquid. I managed to install it 99% aligned correctly and a small bubble near the middle of the screen that doesn't bother me much. I'd give it a 8/10 just cause installation is hard.

I use this one. I know it's not the one you asked about but I tried a plastic film screen protector and it was terrible it had a grabby feel when swiping. The glass one feels just like the original screen although it's a little more labour to install.

https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_cp_apa_i_05JmFb9PRY57D

Here you go.

I ordered this one, worked for me, have not had any issue. Whitedome is too expensive for me.

This one is a UV activated adhesive protector. It's great and fits perfectly with the included case.

https://www.amazon.com/Alinsea-Protector-Fingerprint-Compatible-Replacement/dp/B07X8FFWK2/ref=mp_s_a_1_1_sspa?keywords=oneplus+7+pro+screen+protector&qid=1577940878&sprefix=oneplus+7+&sr=8-1-spons&psc=1&smid=A1AT9FHW4NLEYN&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE5WVFXNjJXWjNUS00mZW5jcnlwdGVkSWQ9QTA5ODA5MzQxUFZQMjNaTDRZUlpMJmVuY3J5cHRlZEFkSWQ9QTAyMjIwMjRFMElGS0hCNzI3V1kmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

In regards to your quality tempered glass comment, I just wanted to let everyone know I recently bought this https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_other_apa_i_.jsdEb3DNDV91 for my op7T pro last weekend, and it comes with the curing liquid and uv curing light for about 1/4 of the price of the Whitestone Dome. It was my first time using a tempered glass protector that requires curing but I'm extremely happy with the result and would highly recommend.

Same as white dome, but way cheaper. https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_other_apa_i_9eCgEbWZZJQ5Q

Alinsea Screen Protector for OnePlus 7 Pro/7T Pro Tempered Glass [Full Adhesive] [Fingerprint Sensor Compatible][Lifetime Replacement Warranty][3D Glass] Screen Protector for OnePlus 7 Pro/7T Pro https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_sms_apa_i_8io7EbEKYV004

i use this one .3 in the package + you get a gift after opening the package and following a site. I got 2 wireless chargers and a pair of wireless headphones already. Its free so don't expect the best quality but imo the wireless charger is really good(it can even fast charge).

Amazon's choice, the "Alinsea" brand screen protector was rated #1 in this Android authority article. The Amazon link is here

Here you go fam

https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_cp_apa_i_.XcNFbNWRKY67

https://www.amazon.com/dp/B07X8FFWK2/ Alinsea protector. I'm using it with the original OP7pro case. Read the instructions, watch the install video, put it away because it seems intimidating. Next day, read and watch, then install it.

Very important to clean the screen perfectly and to cover holes very well. The liquid flows out a bit and can get into the holes. It also filled in small screen scratches so they basically disappeared. I also made sure I was working in a dust free environment.

Alinsea Screen Protector for OnePlus 7 Pro/7T Pro Tempered Glass [Full Adhesive] [Fingerprint Sensor Compatible][Lifetime Replacement Warranty][3D Glass] Screen Protector for OnePlus 7 Pro/7T Pro https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_em_apa_i_f9SwEbS9R95A0

This is the one I use. Application is tricky, and Im on my second protector (messed up the first try), but when you get it right its really nice

So apparently you need to get one that has some kind of UV activated liquid adhesive. This is the one I’ve seen other people say worked.

I'd recommend an Alinsea protector over any Whitestone one any day. Alinsea is 30 dollars cheaper and has free replacements if you mess up an install, vs whitestone charging you an extra 10 for replacements.

I'm currently using this messy one.

Alinsea Screen Protector for OnePlus 7 Pro/7T Pro Tempered Glass [Full Adhesive] [Fingerprint Sensor Compatible][Lifetime Replacement Warranty][3D Glass] Screen Protector for OnePlus 7 Pro/7T Pro https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_tw_apa_i_D5kgEbF7765WT

https://www.amazon.com/dp/B07X8FFWK2?ref=ppx_pop_mob_ap_share

I highly recommend this screen protector. It works by using a UV light activated adhesive that keeps the protector in place. It's more work to put on than your average screen protector, but it's easily the best one I've ever used.

It can be removed easily (in the event you need to replace it) and works with most cases.

I highly recommend this one to anyone having issues with their fingerprint reader.

I use Alinsea for mine and it's seriously the best screen protector I've ever used for any phone, and I've gone through so many. Absolutely no bubbles or gunk from the oleophobic coating. It was sold out in Amazon for a little while and had to get a more expensive one and that one was aleady coming off. It's back up in Amazon and I bought two of them lol.

https://www.amazon.com/dp/B07X8FFWK2/ref=cm_sw_r_sms_apa_i_eTuvEb4W6RZP6

Hello. I think this has been talked about already in this thread. My personal favorite is Whitestone Done glass. It's pricey though. The company does offer lifetime warranty. I have used said warranty when my glass had a chip and crack in it from normal use. The application process can be a bit overwhelming.

I recently purchased something similar that is comparable. The application is just not as elaborate as Whitestone.

https://www.amazon.com/dp/B07X8FFWK2?ref=ppx_pop_mob_ap_share

Good luck in your search.

I'm on my third one of these:

https://www.amazon.com/Alinsea-Protector-Fingerprint-Compatible-Replacement/dp/B07X8FFWK2/ref=sr_1_3?crid=1FNTTP47AJ91M&keywords=alinsea+screen+protector+for+oneplus+7+pro&qid=1584096261&sprefix=allinse%2Caps%2C154&sr=8-3

Nice thing is they do have a lifetime warranty, so when you do have issues, they are AWESOME about just shipping another. This one I have on now has been on for about three months, and has held up very well. Does it have some imperfections ? Yes, but still better than no protection at all.

I love this 7 Pro dearly, but I truly hope these curved screens go away very quickly....

You should probably look into getting a tempered glass screen protector. This is the one I have. It requires some work to get setup but you could also go for this one which is more spendy but less setup required.

The LK screen protectors are trash and have indentations on them. You'll notice it when you put it on the phone. Go with the Alinsea screen protector. Search its name on reddit and you'll see the reviews. Left you a hyperlink on the name Alinsea

https://www.amazon.com/gp/product/B07X8FFWK2/

Alinsea Screen Protector for OnePlus 7 Pro/7T Pro Tempered Glass

I've had this one for 9 months now and I had 0 issues with it. Still in perfect condition, no bubbles or edges lifting.

Here's a good screen protector

Here's a good controller

And here's a clip to attach your phone to it

Glass Screen take your time when applying

1. McLaren Case best case all around, I would buy it again if I could
2. Case SUPCASE Unicorn Beetle best case to show off the back color/design
3. Mofi Case nice slim case with a good grip
4. Gesma Case the slimmest case I've test it
5. Slim Case another slim case